<html>
<body>
Ahojte,<br><br>
ten LINDOWS som nerozchodil, nepomohli ani HW experimenty a uz ma to
prestalo bavit tak som si zohnal Mandrake 9.2. Ten je skvely, bez
problemov nabehol, vsetko mi fici (este som neskusil skener Canon), ale
podobne ako pri MDK 8.2 neide mi modem. Stiahol som si ScanModem (vypis
je na konci mailu) aj som si stiahol nejake ovladace, ak som to spravne
pochopil (ltmodem-0.9.9.tgz a ltmodem8.26a9.tar.gz), ale vobec neviem ako
sa taketo veci v linuxe instaluju, v com, pod cim a vobec ci su dobre a
ci su to vobec ovladace na moj modem???<br>
Dalej tiez vlastne neviem ako sa napr. odinstalovavaju niektore
aplikacie, totiz mam cesku verziu s OpenOffice1.1, chel by som ju
odinstalovat a nainstalovat slovensku, ale neviem ako. Preinstalovat sa
to neda lebo tam mi instalator vyhodi iba moznost opravy.<br>
Mozete mi please niekto pomoct alebo ma aspon nasmerovat na nejaku
literaturu, ktora by bola uplne pre blbych, ktori uplne zacinaju
(najlepsie v slovencine alebo v cestine v najhorsom preluskam aj
anglicky)????<br>
Teraz som sa kvoli internetu musel vratit k Win, ale fakt by som rad
ostal pri tom Linuxe.<br><br>
Diki <br><br>
Martin<br><br>
Tu je ten vypis zo ScanModem je toho kvantum a vobec neviem co z toho a
ci vobec je to podstatne<br><br>
<br>
<pre> The modem has a supported Lucent/Agere DSP (digital signal
processing) chipset
with primary PCI_ID: 11c1:0440
DSP=1
The most recent update of scanModem accessed at
<a href="http://linmodems.technion.ac.il/packages/scanModem.gz" eudora="autourl">http://linmodems.technion.ac.il/packages/scanModem.gz
</a> should ALWAYS be used!! Current UPDATE=2004
February 17
URLs to cogent advice are regularly entered and updated, and your
problem may be solved therein.
If further help is needed, send a description of your problem
to: discuss@linmodems.org
with this ModemData.txt Attached, using the following in the email
Subject Line:
scanModem, mandrake kernel 2.4.22-10mdk
Always send this ENTIRE ModemData.txt. It includes subtle
diagnostic ouputs needed to best guide you.
For instructions to UNSUBSCRIBE from discuss@linmodems.org,
send an email to: discuss-help@linmodems.org
-------------- System information ------------------------
mandrake Mandrake Linux release 9.2 (FiveStar) for i586
on System with processor: i686
supported by kernel: 2.4.22-10mdk
assembled with compiler: 3.3.1
mandrake is not yet providing pre-compiled drivers for WinModems
An AC'97 modem codec was not detected
Path to lspci is: /usr/bin/lspci
--------- lspci scan ----------------
PCI_bus
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
07)
00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 07)
00:0e.0 Communication controller: Lucent Microelectronics 56k WinModem
(rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta
LT] (rev 15)
-------------------------------------
Modem candidates are at PCI_buses: 00:0e.0
Providing detail for device at PCI_bus 00:0e.0
with vendor-ID:device-ID
<x-tab> </x-tab>
----:----
Class 0780: 11c1:0440 Communication controller: Lucent
Microelectronics 56k WinModem (rev 01)
=== Checking 11c1 through chipset providers and modem assemblers
====
Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere
Systems, Inc.
Information is at:
<a href="http://www.agere.com/support/client/modem_drivers.html" eudora="autourl">http://www.agere.com/support/client/modem_drivers.html
</a> 0x0440 -- Mars 2 - data/fax/voice
======= PCI_ID checking completed ======
Update=2004 February 17
The desired installer name is like:
========================================
ltmodem-kv-2.4.22_10mdk-8.26a9-1.i686.rpm
----------------------------------------
ltmodem-kv-Kernel_FL-LTver--.CPU.rpm explains the
versioning.
For your System
Kernel_FL is 2.4.22-10mdk , the full kernel version displayed by: uname
-r
LTver is 8.26a9, the release of the compiler kit
8.26 is the Agere core code designation.
The proccesor type or CPU is:
i686 dispayed by: uname -m
used in compiling and assembling driver packages.
A suitable installer is not available as of this 2004 February 17
update.
Check in the section mandrake at
<a href="http://ltmodem.heby.de/" eudora="autourl">http://ltmodem.heby.de/
</a> for a subsequent Installer submission.
The closest match to your i686=CPU
is recommended.
For example replacements in order of preference for an
i686 would be i586, i486 and i386
If not present use the ltmodem-8.26a9.tar.gz compiler kit.
The list of available Installers for mandrake as of this 2004
February 17
is inserted into to ModemData.txt.2
SubSystem 11c1:0440 Lucent Microelectronics LT
WinModem 56k Data+Fax+Voice+Dsvd
<x-tab> </x-tab>Flags: bus
master, medium devsel, latency 0, IRQ 10
<x-tab> </x-tab>Memory at
d8000000 (32-bit, non-prefetchable) [size=256]
<x-tab> </x-tab>I/O ports
at e400 [size=8]
The following information blocks just query some ppp support items.
====================================================
grep ppp /etc/modules.conf
-------------------------------------
-------------------------------------
Be sure to read the section about ppp related modules and aliases in
ModemData.txt.2
DEVPPP=crw------- 1 root root 108, 0 jan 1 1970 /dev/ppp
DEVFS=active
DEVFSD=/etc/devfsd.conf
Supporting /dev/modem symbolic link:
/etc/devfs/conf.d/modem.conf
------------------------------
REGISTER<x-tab> </x-tab>^tts/0$<x-tab> </x-tab>CFUNCTION
GLOBAL mksymlink tts/0 modem
UNREGISTER<x-tab> </x-tab>^tts/0$<x-tab> </x-tab>CFUNCTION
GLOBAL unlink modem
------------------------------
---- dmesg queries -------
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
ACPI: have wakeup address 0xc0001000
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
ACPI: RSDP (v000
AWARD
) @ 0x000f7610
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x17ff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x17ff3040
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
ACPI: MADT not present
Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount
hdc=ide-scsi acpi=ht resume=/dev/hda5 splash=silent
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: ACPI tables contain no PCI IRQ routing entries
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
The ModemDriverCompiling.txt is a MUST READ,
if you are not experienced in configuring kernel-source/
or get "Unresolved symbols" upon driver insertion.
Most recent WinModem fixes are in:
<a href="http://linmodems.technion.ac.il/FAQ.html" eudora="autourl">http://linmodems.technion.ac.il/FAQ.html
</a> The modem has a supported Lucent/Agere DSP (digital signal
processing) chipset
with primary PCI_ID: 11c1:0440
DSP=1
=== Checking 11c1 through chipset providers and modem assemblers
====
Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere
Systems, Inc.
Information is at:
<a href="http://www.agere.com/support/client/modem_drivers.html" eudora="autourl">http://www.agere.com/support/client/modem_drivers.html
</a> 0x0440 -- Mars 2 - data/fax/voice
======= PCI_ID checking completed ======
Update=2004 February 17
The desired installer name is like:
========================================
ltmodem-kv-2.4.22_10mdk-8.26a9-1.i686.rpm
----------------------------------------
ltmodem-kv-Kernel_FL-LTver--.CPU.rpm explains the
versioning.
For your System
Kernel_FL is 2.4.22-10mdk , the full kernel version displayed by: uname
-r
LTver is 8.26a9, the release of the compiler kit
8.26 is the Agere core code designation.
The proccesor type or CPU is:
i686 dispayed by: uname -m
used in compiling and assembling driver packages.
A suitable installer is not available as of this 2004 February 17
update.
Check in the section mandrake at
<a href="http://ltmodem.heby.de/" eudora="autourl">http://ltmodem.heby.de/
</a> for a subsequent Installer submission.
The closest match to your i686=CPU
is recommended.
For example replacements in order of preference for an
i686 would be i586, i486 and i386
If not present use the ltmodem-8.26a9.tar.gz compiler kit.
The list of available Installers for mandrake as of this 2004
February 17
is inserted into to ModemData.txt.2
The following information blocks just query some ppp support items.
====================================================
grep ppp /etc/modules.conf
-------------------------------------
-------------------------------------
Be sure to read the section about ppp related modules and aliases in
ModemData.txt.2
DEVPPP=crw------- 1 root root 108, 0 jan 1 1970 /dev/ppp
DEVFS=active
DEVFSD=/etc/devfsd.conf
Supporting /dev/modem symbolic link:
/etc/devfs/conf.d/modem.conf
------------------------------
REGISTER<x-tab> </x-tab>^tts/0$<x-tab> </x-tab>CFUNCTION
GLOBAL mksymlink tts/0 modem
UNREGISTER<x-tab> </x-tab>^tts/0$<x-tab> </x-tab>CFUNCTION
GLOBAL unlink modem
------------------------------
---- dmesg queries -------
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
ACPI: have wakeup address 0xc0001000
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
ACPI: RSDP (v000
AWARD
) @ 0x000f7610
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x17ff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x17ff3040
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
ACPI: MADT not present
Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount
hdc=ide-scsi acpi=ht resume=/dev/hda5 splash=silent
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: ACPI tables contain no PCI IRQ routing entries
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
The ModemDriverCompiling.txt is a MUST READ,
if you are not experienced in configuring kernel-source/
or get "Unresolved symbols" upon driver insertion.
Most recent WinModem fixes are in:
<a href="http://linmodems.technion.ac.il/FAQ.html" eudora="autourl">http://linmodems.technion.ac.il/FAQ.html
</a></body>
</html>