[linux] Scanner - Microtek V6 USL
Valter
mv.alter na post.sk
Úterý Říjen 17 03:46:33 CEST 2000
Valter wrote:
>
> Hi !
>
> I am tested new scanner (not listed in SANE Backends list)
>
> Microtek V6 USL (with both SCSI and USB port) - tested only SCSI
> (with microtek2 backend)
> $cat /proc/scsi/scsi
> | Host: scsi1 Channel: 00 Id: 06 Lun: 00
> | Vendor: Model: Scanner V6USL Rev: 1.06
> | Type: Scanner ANSI SCSI revision:
> 02
> | (scsi1:0:6:0) Device using Narrow/Async transfers.
>
> With this scanner is included SCSI Adapter - Adaptec 2902 E/I
> It is aic7850 (the aic7xxx family) an work with aic7xxx.o
>
> $cat /proc/scsi/aic7xxx/1
> | Adaptec AIC7xxx driver version: 5.1.28/3.2.4
> | SCSI Adapter: Adaptec AIC-7850 SCSI host adapter
> | Narrow Controller at PCI 0/18/0
> | PCI MMAPed I/O Base: 0xeb001000
> | Adapter SEEPROM Config: SEEPROM not found, using defaults.
> | Adaptec SCSI BIOS: Disabled
> | IRQ: 11
> | SCBs: Active 0, Max Active 1,
> | Allocated 15, HW 3, Page 255
>
> Result:
> depth 8 bit and 12 bit is working
> mode color, grayscale, line-art is working
> problem: after several minutes of no using scaner the lamp
> shuts-down and not power-up automaticaly at next request
> Attachment contain result of: scanimage -d
>
> System:
> RedHat 6.2 (on Dual PIII-850, with Adaptec 7880 on-board chip)
> XFree86-4.0.1
> sane-1.0.2
> xscanimage
-----------------------------------------
Valter @ SFK Acorn Senec, Slovak Republic
Europe, Earth, Solar System, Milky Way
134-th Dimension, Universe #6482311246243
Další informace o konferenci linux