[linux] Automaticke pripajanie CD-ROM

[zetorko na host.sk]

Ahojte,

    Takze este k tomu mojmu problemu. Bolo to naozaj sposobene zrejme
tym jadrom, ktore v MDK 8.1 nepodporovalo supermount. Teraz som si
stiahol najnovsiu verziu tohoto kernelu a takisto aj devfsd a ide. Ale zasa
sa vyskytol ani nie problem, ale skor taka mala neprijemnost.

[ fstab ]
    /dev/hda2 / ext3 defaults 1 1
    none /dev/pts devpts mode=0620 0 0
    none /dev/shm tmpfs defaults 0 0
    /dev/scd0 /mnt/cdrom supermount dev=/dev/scd0,fs=auto,ro,--,user 0 0
    /dev/hdd /mnt/cdrom2 supermount dev=/dev/hdd,fs=auto,ro,--,user 0 0
    /dev/fd0 /mnt/floppy supermount dev=/dev/fd0,fs=auto,--,user 0 0
    /dev/hda1 /mnt/win_c vfat iocharset=iso8859-2,codepage=852 0 0
    /dev/hda6 /mnt/win_d vfat iocharset=iso8859-2,codepage=852 0 0
    /dev/hda7 /mnt/win_e vfat iocharset=iso8859-2,codepage=852 0 0
    /dev/hda8 /mnt/win_f vfat iocharset=iso8859-2,codepage=852 0 0
    none /proc proc defaults 0 0
    /dev/hda5 swap swap defaults 0 0

Rony vdaka nahradenie tych linkov pomohlo, inak to naozaj neslo.

Potreboval by som poradit, aky parameter mozem zadat, aby sa mi to
spustalo "na poziadanie", napr. ak nejaka aplikacia potrebuje nieco
doinstalovat,
otvori CD-ROMku a vypyta si CD. Ak je to mozne, ak nie nevadi, ide
to aj tak, ze to spravim manualne. Automounter sa spusta pri starte aj
ustility [am-utils, autofs, defsd]. Ono malo by to byt mozne, aspon v MDK
8.0 to islo bez problemov.
Dale by som potreboval poradit ci by sa nedal pre floppy zadat nejaky,
parameter ktory by odstranil to ustavicne [drrrrrrrr :-)] akonahle
pristupujem
do /mnt/ a nizsie a to aj ked som napr v stromej strukture niekde na CD.
Je to dost otravujuce a to iste robi dost dlhu dobu aj pri spustani systemu
aj pri vypinani. Da sa s tym nieco spravit?
Skusal som zadat noauto, ale v tom pripade, mi ho zase automaticky
nenacita, vzdy ho musim ist cez prikaz alebo control panel pripojit,
potom s nim pracovat a zase odpojit. Musi to ist aj inak.

Ale vdaka bohu, uz mi to aspon dovoli robit z CDckami aj disketami,
aj to je nieco. :-))

Co znamena devfs=mount v lilo.conf. Aktualne ho mam z primarnej
spustacej sekcie odstraneny, lebo inak by to neslo automaticky pripajat.
Pozeral som aj manual ale nikde tam nemozem volbu 'mount' pre devfsd
najst.

Vypis [lilo.conf]
    boot=/dev/hda2
    map=/boot/map
    install=/boot/boot.b
    vga=normal
    default=linux
    keytable=/boot/sk-qwerty.klt
    lba32
    prompt
    timeout=100
    message=/boot/message
    menu-scheme=wb:bw:wb:bw
    image=/boot/vmlinuz-2.4.8-34.1mdk
         label=linux
         root=/dev/hda2
         append=" nobiospnp hdc=ide-scsi quiet"
         vga=788
         read-only
    image=/boot/vmlinuz-2.4.8-34.1mdk
         label=linux-nonfb
         root=/dev/hda2
         append=" hdc=ide-scsi devfs=mount"
         read-only
    image=/boot/vmlinuz-2.4.8-34.1mdk
         label=failsafe
         root=/dev/hda2
         append=" hdc=ide-scsi devfs=mount failsafe"
         read-only
    other=/dev/hda1
         label=windows
         table=/dev/hda
        other=/dev/fd0
     label=floppy
         unsafe


    ls -al /dev/hd*
    lr-xr-xr-x    1 root     root           32 dec 20  2001 /dev/hda ->
ide/host0/bus0/target0/lun0/disc
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda1 ->
ide/host0/bus0/target0/lun0/part1
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda2 ->
ide/host0/bus0/target0/lun0/part2
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda3 ->
ide/host0/bus0/target0/lun0/part3
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda5 ->
ide/host0/bus0/target0/lun0/part5
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda6 ->
ide/host0/bus0/target0/lun0/part6
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda7 ->
ide/host0/bus0/target0/lun0/part7
    lr-xr-xr-x    1 root     root           33 dec 20  2001 /dev/hda8 ->
ide/host0/bus0/target0/lun0/part8
    lr-xr-xr-x    1 root     root           30 dec 20  2001 /dev/hdd ->
ide/host0/bus1/target1/lun0/cd
    lr-xr-xr-x    1 root     root            6 dec 20  2001 /dev/hdy ->
ide/cd/

Na co kontretne ukazuju tie vypisy tykajuce sa CD-ROM a napalovacky?
Preco mi system rozpozna:
1x CD-ROM [CD-ROM]
1x CD-ROM [napalovacka]
1xSCSI [napalovacka]
???

    ls -al /dev/sc*
    lr-xr-xr-x    1 root     root           31 dec 20  2001 /dev/scd0 ->
scsi/host0/bus0/target0/lun0/cd
    /dev/scsi:
    celkom 0
    drwxr-xr-x    1 root     root            0 dec 20 10:42 ./
    drwxr-xr-x    1 root     root            0 jan  1  1970 ../
    drwxr-xr-x    1 root     root            0 dec 20 10:42 host0/

--------------------------------------------------------------
Dakujem vsetkym za ochotu a trpezlivost a prajem pekny den.
P.S.: Stastne a vesele vianocne sviatky a novy rok.
Milan