[linux] Odideny MB alebo HD

[Martin Kavec]

Ahojte,

	dnes mi na tvrdo zamrzol pocitac a pomohol iba Reset button. Pred
tym som si ale na konzole vsimol, ze ide0 straca interupty. Toto sa mi do
teraz s tymto pocitacom nestalo a to uz je viac ako pol roka. Podotykam,
ze sa to nestalo pri experimentovani s hdparm.
	
	Po restarte, ked sa opravili chybne sektory, som chcel
skontrolovat file system, ale len co som chcel remount-nut particiu
"ro", pocitac opat zatuhol a opat "ide0 lost interupt". Takze zase Reset,
ale, tento raz system nespoznal systemovy (jediny) disk. Obaval som sa
najhorsieho, ze som stratil data. Zobral som disk do druheho pocitaca
(original RH 7.2 kernel) a nastastie som vsetky particie mohol bez
problemov precitat a  zalohovat. V tej situacii som si myslel, ze mi opat
odisiel motherboard (tohto roku na tomto PC uz druhy - prvy MSI a tento je
SOLTEK).
	Kedze potrebujem surne pracovat s datami na tomto disku (Maxtor
30.7 GB ATA66, zobral som ho domov (Mandrake 8.0, kernel 2.4.3, DMA
default on, ale motherboard podporuje iba ATA33). A toto hlasi jadro pri
starte.


ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA
hda: WDC AC26400R, ATA DISK drive
hdb: Maxtor 53073H4, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hdc: CREATIVE DVD-ROM DVD1241E, ATAPI CD/DVD-ROM drive
hdd: ST34321A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12594960 sectors (6449 MB) w/512KiB Cache, CHS=784/255/63, (U)DMA
hdb: 1002960 sectors (514 MB) w/2048KiB Cache, CHS=1024/255/63, UDMA(33)
hdd: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=8894/15/63, UDMA(33)
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
 hdb: hdb1 hdb2 hdb3 hdb4 <hdb: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: DMA disabled
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
end_request: I/O error, dev 03:44 (hdb), sector 0
 >
 hdd: [PTBL] [523/255/63] hdd1

	Ked odpojim hdb, vsetko je v poriadku.

	Hladal som na Internete "DriveReady SeekComplete Error", ale ludia
mali taketo problemy pri experimentovani s nastavenim hdparm. 

Prosim, prosim, poradte mi. Je ten disk v cudu?

Vdaka,

Martin