[linux] dma_intr error

[Lubo Drobny]

Tak som to konecne vyriesil - dik za vsetky rady, 
problem bol v tomto:
- na IDE radici som mal na klasickom kabli disk aj CD ROM
tak som ich dal zvlast a disk som dal na 80 zilovy ATA100 kabel 
a uz je to OK

lubo


Dňa Streda 19 December 2001 17:45 Lubo Drobny napísal:
> Zdravim,
>
> pri bootovani mi vypisuje kernel dole uvedene errory, vsetko vsak ide dobre
> (system nabehne) netusite co sa mu nepaci? resp. je to vobec chyba?
>
> Dik
>
> lubo
>
> ps: mam kernel 2.4.16 a RH 7.2
>
> ...........
> ..........
> hda: WDC AC28400R, ATA DISK drive
> hdb: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, (U)DMA
> ide-floppy driver 0.97.sv
> Partition check:
>  hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide0: reset: success
>  hda1 hda2 hda3 < hda5 hda6 hda7 >
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ide-floppy driver 0.97.sv
> .... atd
>
> _______________________________________________
> http://lists.linux.sk/listinfo/linux
> http://search.lists.linux.sk