[linux] USB a hardisk

[Dominik Tariška]

Ja som USB flash disk pripajal na RH 8.0 takto:

Najskor pozri, ci ti bezi demon "khubd" (/etc/rc.d/init.d/hotplug start),
ktory obsluhuje "hotplug" zariadenia (USB). Ak nie, skus upgrade balikov
"hotplug" a "modutils".

Po upgrade balikov hotplug a modutils na hotplug-2002_08_26-1.noarch.rpm,
modutils-2.4.19-1.i386.rpm nabehol aj spominany demon. Potom uz stacilo len
pripojit deteknuty disk (mount /dev/sda1 /mnt/usb -t vfat).
____
Dominik

----- Original Message -----
From: "Matej Kosik" <kosik na decef.elf.stuba.sk>
To: <linux na lists.linux.sk>
Sent: Monday, February 24, 2003 12:04 AM
Subject: Re: [linux] USB a hardisk


> On Sunday 23 February 2003 09:57, you wrote:
> > Dna Sat, Feb 22, 2003 at 11:26:42PM +0100 Matej Kosik napisal
> >
> > >     mount -t vfat /dev/sda1 /mnt/usb/
> > >
> > > a ine (tomu podobne zariadenia) ale vzdy dostem tu istu odpoved:
> > >
> > >     mount: /dev/sda1 is not a valid block device
> >
> > zdravim ta,
> > ja som dostaval podobnu hlasku ked som sa snazil pripojit usb handydrive
> > od apacera. problem zmizol ked som natiahol modul usb-storage ('modprobe
> > usb-storage') a odvtedy to ide pekne. nie je to sice usb disk ale za
> > pokus to stoji ;)
>
> dik
>
> do jadra mam zakompilovane:
> - SCSI Support
> - SCSI Disk Support
> - SCSI Generic Support
> - USB Mass Storage Support (usb-storage v podstate mam)
>
> log po pripojeni zariadenia oznami, ze sa tam to zariadenie
> objavilo:
>
> shire kernel: hub.c: USB new device connect on bus3/1,assigned device
number 2
> shire kernel: scsi1 : SCSI emulation for USB Mass Storaged evices
> shire kernel: Adding Swap: 497972k swap-space (priority -1)
>
> neviem co by som taj este mohol vyskusat,
> treba spustit nejaky zvlastny program?
> treba to primontovavat nejako specialne?
>
> _______________________________________________
> http://lists.linux.sk/listinfo/linux
> Prehladavanie archivu: http://search.lists.linux.sk
> Meta FAQ: http://faq.lists.linux.sk
>