[linux] HP Proliant ML110 + Promise S150 SX4

[Kocur]

No moze to byt aj SW aj HW problem...

k HP serverom byva CD z nazvom SmartStart...

Toto CD configuruje BIOS (lepsie povedane FLASHuje) na taky typ OS
aky potrebujesh...  (teda aspon to co mam ja)

skusal si nabootovat z tohoto CD, a zvolit niekde pri vybere OS, ze xesh 
UNIX/Linux ..??

to je jedine co uz ma napada...

----- Original Message ----- 
From: "Martin Kyrc" <martin.kyrc na developers.sk>
To: "Vseobecna diskusia o Linuxe" <linux na lists.linux.sk>
Sent: Thursday, December 16, 2004 9:26 AM
Subject: Re: [linux] HP Proliant ML110 + Promise S150 SX4


> Ahoj
>
> On 16.12.2004 7:35:23, Kocur wrote:
>> Nazdar...
>
>>> <cut>
>>> SCSI Dev sda: drive cache: write back
>>> /dev/scsi/host0/bus0/target0/lun0:<3>ata1: DMA timeout
>>> scsi0: ERROR on channel0, id0, lun0, CDB: Read (10) 00 00 ... 00
>>> Current sda: sense key Medium Error
>>> Additional sense: Unrecovered read error - auto reallocate failed
>>> end_request: I/O error, dev sda, sector0
>>> <koniec>
>
>> tu mi pomohlo ked som v BIOSe vypol ACPI a APIC...
>
>> Ibaze neviem ci sa to da urobit aj u HP servera....
>
>> Ak nie, tak treba kernelu povedat aby ho nepouzil,
>> parameter noacpi (noapic), treba to pripisat do lilo.conf
>
>> caff..
>
> skusal som bootovat s "noapic acpi=off nosmp" a rozne kombinacie
> (samozrejme, okrem default parametrov). pomohlo to, ale nie na dlho...
>
> tu: /dev/scsi/host0/bus0/target0/lun0: .........
> system detekoval particie, ale hned potom:
> EXT3-fs: INFO: recovery required on readonly filesystem
> EXT3-fs: write access will be enabled during recovery
> ata1: DMA timeout
> scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 ... 00
> Current sda: sense key Medium Error
> Additional sense: Unrecovered read error - auto reallocate failed
> end_request: I/O error, dev sda, sector 1121
>
> je to HW alebo SW problem?
>
>
>
> _______________________________________________
> http://lists.linux.sk/listinfo/linux
> Prehladavanie archivu: http://search.lists.linux.sk
> Meta FAQ: http://faq.lists.linux.sk
>