[linux] Route

[jmi]

pre LAN nastav default GW (vo windowsoch nazyvane iba gateway[brana]) na
192.168.1.100

na routri nastav interfacom ipcky ako si napisal, teda 1.100 a 2.2 (a to
dakym skriptom, napr. editaciou /etc/sysconfig/network-scripts/ifcfg-eth0 a
ifcfg-eth1  [takto to ma napr. redhat] alebo rovno prikazmy typu # ifconfig
eth0 192.168.1.100 netmask 255.255.255.0)
dalej routru nastav default gw a to prikazom # route add default gw
192.168.2.1

pre kopmy zo siete 192.168.2.0/24 (okrem brany 2.1) nastav default GW
[branu] na 192.168.2.1

dalej by si mal mat pre kompy zo siete 192.168.2.0/24 routovacku pre siet
192.168.1.0/24
v linuxe: # route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.2.2
vo windowse: # route add 192.168.1.0 mask 255.255.255.0 192.168.2.2

dufam ze som sa nesekol nikde.

jmi

> > Prosim, moze mi niekto pomoct s tym, ako spravne
> > pouzit prikaz route pri takejto zostave? Prosim
> > na moju adresu.
> >
> >
LAN---192.168.1.0---eth0(1.100)-Router-eth1(2.2)---192.168.2.0---Brana(192.1
68.2.1)
>
> Akoze neviem o co Vam ide... . Z uvedeneho Vam mozem poveta len:
>
> ifconfig eth0 192.168.1.0 netmask 255.255.255.0 up
> ifconfig eth1 192.168.2.0 netmask 255.255.255.0 up
> route add default gw 192.168.2.1
>
> Nic co by sa nedalo najist v manualoch... . (man ifconfig, man route).
> J.
>
>
> _______________________________________________
> http://lists.linux.sk/listinfo/linux
> Prehladavanie archivu: http://search.lists.linux.sk
> Meta FAQ: http://faq.lists.linux.sk
>