[linux] Makefile.am Makefile.in
peto
fodrek na kasr.elf.stuba.sk
Pondělí Červenec 12 08:43:48 CEST 2004
Vazena konferencia!
dostal sa mi do ruk zdrojovy kod, ktory ma v sebe len file Makefile.am a
Makefile.in
tusim, ze to este chce niecim pretlacit aby to dalo normalny makefile, lebo
ani jeden premenovany na Makefile nefunguje
Neviet mi poradit cim to este prehnat, kedze script configure v zdrojaku nie
je? pripadne ci nema niedke nieco doplnit, lebo in sa mi zda ako normalny
makefile
Vdaka
Peto
Makefile.am
bin_PROGRAMS=sagcad
sagcad_SOURCES=\
about.c \
about.h \
Assistance.c \
Assistance.h \
B_spline.c \
B_spline.h \
CamProfile.c \
CamProfile.h \
CamSetDlg.c \
CamSetDlg.h \
Command.c \
Command.h \
CopyDlg.c \
CopyDlg.h \
CopyFunc.c \
CopyFunc.h \
CulcInputDlg.c \
CulcInputDlg.h \
Dimension.c \
Dimension.h \
Draw.c \
Draw.h \
DrawArea.c \
DrawArea.h \
DrawMode.c \
DrawMode.h \
DXF_read.c \
DXF_read.h \
DXF_write.c \
DXF_write.h \
Ellipse.c \
Ellipse.h \
EllipseSetDlg.c \
EllipseSetDlg.h \
EnvSetDlg.c \
EnvSetDlg.h \
etc.c \
etc.h \
fileselect.c \
fileselect.h \
font.c \
font.h \
global.c \
global.h \
GridCopyDlg.c \
GridCopyDlg.h \
iges.c \
iges.h \
InputBox.c \
InputBox.h \
intl.h \
LayerSet.c \
LayerSet.h \
LineStyleBox.c \
LineStyleBox.h \
Line_dlg.c \
Line_dlg.h \
List_Block.c \
List_Block.h \
List_cad.c \
List_cad.h \
List_cam.c \
List_cam.h \
List_Dimension.c \
List_Dimension.h \
List_Ellipse.c \
List_Ellipse.h \
List_font.c \
List_font.h \
List_insert.c \
List_insert.h \
List_PolyLine.c \
List_PolyLine.h \
List_Select.c \
List_Select.h \
List_Undo.c \
List_Undo.h \
List_Vertex.c \
List_Vertex.h \
MemoryLeak.c \
MemoryLeak.h \
Mouse.c \
Mouse.h \
MsgBox.c \
MsgBox.h \
NC_read.c \
NC_read.h \
OutsideProcess.c \
OutsideProcess.h \
plcDlg.c \
plcDlg.h \
PostScript.c \
PostScript.h \
PrintSetDlg.c \
PrintSetDlg.h \
sagcad.c \
sagcad.h \
ScalingDlg.c \
ScalingDlg.h \
Select.c \
Select.h \
sgy.c \
sgy.h \
SnapDlg.c \
SnapDlg.h \
spline.c \
spline.h \
StringCulc.c \
StringCulc.h \
TextEditDlg.c \
TextEditDlg.h \
toolbar.c \
toolbar.h \
Trace.c \
Trace.h \
TrimFunc.c \
TrimFunc.h \
TurnDlg.c \
TurnDlg.h \
types.h \
xpm/Both_Trim.xpm \
xpm/Cam25D.xpm \
xpm/CamNcDraw.xpm \
xpm/CamPoket.xpm \
xpm/CamProfile.xpm \
xpm/Cancel.xpm \
xpm/Center.xpm \
xpm/Cont_Line.xpm \
xpm/Copy.xpm \
xpm/Cut.xpm \
xpm/C_Cut.xpm \
xpm/Delete.xpm \
xpm/DimenAngle.xpm \
xpm/DimenAtension.xpm \
xpm/DimenD.xpm \
xpm/DimenDelete.xpm \
xpm/DimenDistance.xpm \
xpm/DimenEdit.xpm \
xpm/DimenPoint.xpm \
xpm/DimenPullLine.xpm \
xpm/DimenR.xpm \
xpm/DimenX.xpm \
xpm/DimenY.xpm \
xpm/Draw.xpm \
xpm/Ellipse.xpm \
xpm/End.xpm \
xpm/EnvSet.xpm \
xpm/Fillet.xpm \
xpm/Help.xpm \
xpm/LayerCopy.xpm \
xpm/LayerMove.xpm \
xpm/Line3.xpm \
xpm/LineStyleChange.xpm \
xpm/Matrix.xpm \
xpm/Mirr.xpm \
xpm/New.xpm \
xpm/Open.xpm \
xpm/outside_process.xpm \
xpm/Para.xpm \
xpm/Parts_in.xpm \
xpm/Paste.xpm \
xpm/Point3.xpm \
xpm/Point_Input.xpm \
xpm/PolyLine.xpm \
xpm/Print.xpm \
xpm/PrinterSetting.xpm \
xpm/RectSelect.xpm \
xpm/Redo.xpm \
xpm/Redraw.xpm \
xpm/ReName.xpm \
xpm/Roll.xpm \
xpm/sagcad.xpm \
xpm/Save.xpm \
xpm/Save2.xpm \
xpm/Scaling.xpm \
xpm/Select.xpm \
xpm/SelectCancel.xpm \
xpm/Split.xpm \
xpm/Trim.xpm \
xpm/Undo.xpm \
xpm/Version.xpm \
xpm/View_0.xpm \
xpm/View_1.xpm \
xpm/View_2.xpm \
xpm/View_3.xpm \
xpm/View_4.xpm \
xpm/View_5.xpm
CPPFLAGS = \
@X_CFLAGS@
# @X_CFLAGS@ \
# -DPACKAGE=\""$(PACKAGE)"\" \
# -DVERSION=\""$(VERSION)"\" \
# -DLOCALEDIR=\""$(LOCALEDIR)"\" \
# -DFONTDIR=\""$(FONTDIR)"\" \
# -DDOCDIR=\""$(DOCDIR)"\" \
# -DTOOLDIR=\""$(TOOLDIR)"\"
INCLUDE = @X_CFLAGS@
sagcad_LDADD = @X_LIBS@
Makefile.in
# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AS = @AS@
AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
DATADIRNAME = @DATADIRNAME@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOCDIR = @DOCDIR@
ECHO = @ECHO@
EXAMPLEDIR = @EXAMPLEDIR@
FONTDIR = @FONTDIR@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
HAVE_LIB = @HAVE_LIB@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
LIB = @LIB@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LOCALEDIR = @LOCALEDIR@
LTLIB = @LTLIB@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
MKINSTALLDIRS = @MKINSTALLDIRS@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POSUB = @POSUB@
RANLIB = @RANLIB@
STRIP = @STRIP@
TOOLDIR = @TOOLDIR@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
X_CFLAGS = @X_CFLAGS@
X_LIBS = @X_LIBS@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
bin_PROGRAMS = sagcad
sagcad_SOURCES = \
about.c \
about.h \
Assistance.c \
Assistance.h \
B_spline.c \
B_spline.h \
CamProfile.c \
CamProfile.h \
CamSetDlg.c \
CamSetDlg.h \
Command.c \
Command.h \
CopyDlg.c \
CopyDlg.h \
CopyFunc.c \
CopyFunc.h \
CulcInputDlg.c \
CulcInputDlg.h \
Dimension.c \
Dimension.h \
Draw.c \
Draw.h \
DrawArea.c \
DrawArea.h \
DrawMode.c \
DrawMode.h \
DXF_read.c \
DXF_read.h \
DXF_write.c \
DXF_write.h \
Ellipse.c \
Ellipse.h \
EllipseSetDlg.c \
EllipseSetDlg.h \
EnvSetDlg.c \
EnvSetDlg.h \
etc.c \
etc.h \
fileselect.c \
fileselect.h \
font.c \
font.h \
global.c \
global.h \
GridCopyDlg.c \
GridCopyDlg.h \
iges.c \
iges.h \
InputBox.c \
InputBox.h \
intl.h \
LayerSet.c \
LayerSet.h \
LineStyleBox.c \
LineStyleBox.h \
Line_dlg.c \
Line_dlg.h \
List_Block.c \
List_Block.h \
List_cad.c \
List_cad.h \
List_cam.c \
List_cam.h \
List_Dimension.c \
List_Dimension.h \
List_Ellipse.c \
List_Ellipse.h \
List_font.c \
List_font.h \
List_insert.c \
List_insert.h \
List_PolyLine.c \
List_PolyLine.h \
List_Select.c \
List_Select.h \
List_Undo.c \
List_Undo.h \
List_Vertex.c \
List_Vertex.h \
MemoryLeak.c \
MemoryLeak.h \
Mouse.c \
Mouse.h \
MsgBox.c \
MsgBox.h \
NC_read.c \
NC_read.h \
OutsideProcess.c \
OutsideProcess.h \
plcDlg.c \
plcDlg.h \
PostScript.c \
PostScript.h \
PrintSetDlg.c \
PrintSetDlg.h \
sagcad.c \
sagcad.h \
ScalingDlg.c \
ScalingDlg.h \
Select.c \
Select.h \
sgy.c \
sgy.h \
SnapDlg.c \
SnapDlg.h \
spline.c \
spline.h \
StringCulc.c \
StringCulc.h \
TextEditDlg.c \
TextEditDlg.h \
toolbar.c \
toolbar.h \
Trace.c \
Trace.h \
TrimFunc.c \
TrimFunc.h \
TurnDlg.c \
TurnDlg.h \
types.h \
xpm/Both_Trim.xpm \
xpm/Cam25D.xpm \
xpm/CamNcDraw.xpm \
xpm/CamPoket.xpm \
xpm/CamProfile.xpm \
xpm/Cancel.xpm \
xpm/Center.xpm \
xpm/Cont_Line.xpm \
xpm/Copy.xpm \
xpm/Cut.xpm \
xpm/C_Cut.xpm \
xpm/Delete.xpm \
xpm/DimenAngle.xpm \
xpm/DimenAtension.xpm \
xpm/DimenD.xpm \
xpm/DimenDelete.xpm \
xpm/DimenDistance.xpm \
xpm/DimenEdit.xpm \
xpm/DimenPoint.xpm \
xpm/DimenPullLine.xpm \
xpm/DimenR.xpm \
xpm/DimenX.xpm \
xpm/DimenY.xpm \
xpm/Draw.xpm \
xpm/Ellipse.xpm \
xpm/End.xpm \
xpm/EnvSet.xpm \
xpm/Fillet.xpm \
xpm/Help.xpm \
xpm/LayerCopy.xpm \
xpm/LayerMove.xpm \
xpm/Line3.xpm \
xpm/LineStyleChange.xpm \
xpm/Matrix.xpm \
xpm/Mirr.xpm \
xpm/New.xpm \
xpm/Open.xpm \
xpm/outside_process.xpm \
xpm/Para.xpm \
xpm/Parts_in.xpm \
xpm/Paste.xpm \
xpm/Point3.xpm \
xpm/Point_Input.xpm \
xpm/PolyLine.xpm \
xpm/Print.xpm \
xpm/PrinterSetting.xpm \
xpm/RectSelect.xpm \
xpm/Redo.xpm \
xpm/Redraw.xpm \
xpm/ReName.xpm \
xpm/Roll.xpm \
xpm/sagcad.xpm \
xpm/Save.xpm \
xpm/Save2.xpm \
xpm/Scaling.xpm \
xpm/Select.xpm \
xpm/SelectCancel.xpm \
xpm/Split.xpm \
xpm/Trim.xpm \
xpm/Undo.xpm \
xpm/Version.xpm \
xpm/View_0.xpm \
xpm/View_1.xpm \
xpm/View_2.xpm \
xpm/View_3.xpm \
xpm/View_4.xpm \
xpm/View_5.xpm
CPPFLAGS = \
@X_CFLAGS@
# @X_CFLAGS@ \
# -DPACKAGE=\""$(PACKAGE)"\" \
# -DVERSION=\""$(VERSION)"\" \
# -DLOCALEDIR=\""$(LOCALEDIR)"\" \
# -DFONTDIR=\""$(FONTDIR)"\" \
# -DDOCDIR=\""$(DOCDIR)"\" \
# -DTOOLDIR=\""$(TOOLDIR)"\"
INCLUDE = @X_CFLAGS@
sagcad_LDADD = @X_LIBS@
subdir = src
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
bin_PROGRAMS = sagcad$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS)
am_sagcad_OBJECTS = about.$(OBJEXT) Assistance.$(OBJEXT) \
B_spline.$(OBJEXT) CamProfile.$(OBJEXT) CamSetDlg.$(OBJEXT) \
Command.$(OBJEXT) CopyDlg.$(OBJEXT) CopyFunc.$(OBJEXT) \
CulcInputDlg.$(OBJEXT) Dimension.$(OBJEXT) Draw.$(OBJEXT) \
DrawArea.$(OBJEXT) DrawMode.$(OBJEXT) DXF_read.$(OBJEXT) \
DXF_write.$(OBJEXT) Ellipse.$(OBJEXT) EllipseSetDlg.$(OBJEXT) \
EnvSetDlg.$(OBJEXT) etc.$(OBJEXT) fileselect.$(OBJEXT) \
font.$(OBJEXT) global.$(OBJEXT) GridCopyDlg.$(OBJEXT) \
iges.$(OBJEXT) InputBox.$(OBJEXT) LayerSet.$(OBJEXT) \
LineStyleBox.$(OBJEXT) Line_dlg.$(OBJEXT) List_Block.$(OBJEXT) \
List_cad.$(OBJEXT) List_cam.$(OBJEXT) List_Dimension.$(OBJEXT) \
List_Ellipse.$(OBJEXT) List_font.$(OBJEXT) \
List_insert.$(OBJEXT) List_PolyLine.$(OBJEXT) \
List_Select.$(OBJEXT) List_Undo.$(OBJEXT) List_Vertex.$(OBJEXT) \
MemoryLeak.$(OBJEXT) Mouse.$(OBJEXT) MsgBox.$(OBJEXT) \
NC_read.$(OBJEXT) OutsideProcess.$(OBJEXT) plcDlg.$(OBJEXT) \
PostScript.$(OBJEXT) PrintSetDlg.$(OBJEXT) sagcad.$(OBJEXT) \
ScalingDlg.$(OBJEXT) Select.$(OBJEXT) sgy.$(OBJEXT) \
SnapDlg.$(OBJEXT) spline.$(OBJEXT) StringCulc.$(OBJEXT) \
TextEditDlg.$(OBJEXT) toolbar.$(OBJEXT) Trace.$(OBJEXT) \
TrimFunc.$(OBJEXT) TurnDlg.$(OBJEXT)
sagcad_OBJECTS = $(am_sagcad_OBJECTS)
sagcad_DEPENDENCIES =
sagcad_LDFLAGS =
DEFS = @DEFS@
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
@AMDEP_TRUE na DEP_FILES = ./$(DEPDIR)/Assistance.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/B_spline.Po ./$(DEPDIR)/CamProfile.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/CamSetDlg.Po ./$(DEPDIR)/Command.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/CopyDlg.Po ./$(DEPDIR)/CopyFunc.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/CulcInputDlg.Po ./$(DEPDIR)/DXF_read.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/DXF_write.Po ./$(DEPDIR)/Dimension.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/Draw.Po ./$(DEPDIR)/DrawArea.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/DrawMode.Po ./$(DEPDIR)/Ellipse.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/EllipseSetDlg.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/EnvSetDlg.Po ./$(DEPDIR)/GridCopyDlg.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/InputBox.Po ./$(DEPDIR)/LayerSet.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/LineStyleBox.Po ./$(DEPDIR)/Line_dlg.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_Block.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_Dimension.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_Ellipse.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_PolyLine.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_Select.Po ./$(DEPDIR)/List_Undo.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_Vertex.Po ./$(DEPDIR)/List_cad.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_cam.Po ./$(DEPDIR)/List_font.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/List_insert.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/MemoryLeak.Po ./$(DEPDIR)/Mouse.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/MsgBox.Po ./$(DEPDIR)/NC_read.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/OutsideProcess.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/PostScript.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/PrintSetDlg.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/ScalingDlg.Po ./$(DEPDIR)/Select.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/SnapDlg.Po ./$(DEPDIR)/StringCulc.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/TextEditDlg.Po ./$(DEPDIR)/Trace.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/TrimFunc.Po ./$(DEPDIR)/TurnDlg.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/about.Po ./$(DEPDIR)/etc.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/fileselect.Po ./$(DEPDIR)/font.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/global.Po ./$(DEPDIR)/iges.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/plcDlg.Po ./$(DEPDIR)/sagcad.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/sgy.Po ./$(DEPDIR)/spline.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/toolbar.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
CFLAGS = @CFLAGS@
DIST_SOURCES = $(sagcad_SOURCES)
DIST_COMMON = Makefile.am Makefile.in
SOURCES = $(sagcad_SOURCES)
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu src/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
|| test -f $$p1 \
; then \
f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install
$(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p
$(DESTDIR)$(bindir)/$$f; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo "$$p" | sed
's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
rm -f $(DESTDIR)$(bindir)/$$f; \
done
clean-binPROGRAMS:
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
sagcad$(EXEEXT): $(sagcad_OBJECTS) $(sagcad_DEPENDENCIES)
@rm -f sagcad$(EXEEXT)
$(LINK) $(sagcad_LDFLAGS) $(sagcad_OBJECTS) $(sagcad_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Assistance.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/B_spline.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/CamProfile.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/CamSetDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Command.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/CopyDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/CopyFunc.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/CulcInputDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/DXF_read.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/DXF_write.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Dimension.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Draw.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/DrawArea.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/DrawMode.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Ellipse.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/EllipseSetDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/EnvSetDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/GridCopyDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/InputBox.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/LayerSet.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/LineStyleBox.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Line_dlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_Block.Po na am__quote@
@AMDEP_TRUE@@am__include@
@am__quote na ./$(DEPDIR)/List_Dimension.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_Ellipse.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_PolyLine.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_Select.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_Undo.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_Vertex.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_cad.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_cam.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_font.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/List_insert.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/MemoryLeak.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Mouse.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/MsgBox.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/NC_read.Po na am__quote@
@AMDEP_TRUE@@am__include@
@am__quote na ./$(DEPDIR)/OutsideProcess.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/PostScript.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/PrintSetDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/ScalingDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Select.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/SnapDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/StringCulc.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/TextEditDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/Trace.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/TrimFunc.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/TurnDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/about.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/etc.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/fileselect.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/font.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/global.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/iges.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/plcDlg.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/sagcad.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/sgy.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/spline.Po na am__quote@
@AMDEP_TRUE@@am__include@ @am__quote na ./$(DEPDIR)/toolbar.Po na am__quote@
distclean-depend:
-rm -rf ./$(DEPDIR)
.c.o:
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo'
@AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
.c.obj:
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo'
@AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(COMPILE) -c `cygpath -w $<`
.c.lo:
@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo'
@AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
CCDEPMODE = @CCDEPMODE@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
ETAGS = etags
ETAGSFLAGS =
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS)
installdirs:
$(mkinstalldirs) $(DESTDIR)$(bindir)
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
distclean-am: clean-am distclean-compile distclean-depend \
distclean-generic distclean-libtool distclean-tags
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am:
install-exec-am: install-binPROGRAMS
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
uninstall-am: uninstall-binPROGRAMS uninstall-info-am
.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
clean-generic clean-libtool distclean distclean-compile \
distclean-depend distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am info info-am install \
install-am install-binPROGRAMS install-data install-data-am \
install-exec install-exec-am install-info install-info-am \
install-man install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool tags uninstall uninstall-am \
uninstall-binPROGRAMS uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Další informace o konferenci linux