[linux] problem s usb

[pecko]

Dňa Ne 25. Júl 2004 13:59 Andrej Kacian napísal:
>
> Nevsimol som si, ze by ste sa zatial bavili o module usb-storage.
> Skus ho mat natiahnuty predtym, ako pripajas zariadenie.

mozno by pomohlo, keby si si lepsie precital moj prvy mejl:-))) tam som 
jasne napisal, ze vsetko som zakompiloval do jadra. ale aby si mal 
predsa len lepsiu predstavu, co k tomu vsetko treba, uvediem, co podla 
http://www.cs.sfu.ca/~ggbaker/personal/cf-linux je potrebne pre 
rozbehanie citacky:
Installing the Drivers


 The USB driver serves up your reader as a SCSI device, so you also need 
to install the SCSI drivers. In the "SCSI Support" section, enable 
these. The configuration name and the module name are listed: 

SCSI Support (CONFIG_SCSI, scsi.o) 
SCSI disk support (CONFIG_BLK_DEV_SD, sd_mod.o) 
SCSI generic support (CONFIG_CHR_DEV_SG, sg.o) 
Probe all LUNs on each SCSI device (CONFIG_SCSI_MULTI_LUN), required 
only for multi-card devices. 

You need to use the USB mass storage driver to access your reader. In 
the "USB Support" section of the kernel configuration, enable the 
following:

 Support for USB (CONFIG_USB, usb.o) 
Preliminary USB device file system (CONFIG_USB_DEVICEFS) 
Whatever USB drivers you need, one or more of: ECHI HCD 
(CONFIG_USB_EHCI_HCD, usb-ehci-hcd.o), UHCI (CONFIG_USB_UHCI, 
usb-uhci.o), OHCI (CONFIG_USB_OHCI, usb-ohci.o) 
USB Mass Storage support (CONFIG_USB_STORAGE, usb-storage.o) 

Compile your kernel with these options and reboot (or just load the 
relevant modules if you've got them). And, plug the thing in, if you 
haven't already. 

poriadne si precitaj, co k tomu treba. vsetko to mam na tvrdo 
zakompilovane do jadra, takze vsetko, co u teba "zvykne" fungovat 
normalne, je natiahnute pri boote.

ale namiesto natahovania sa na slovickach by som uz rad privital, aby mi 
niekto konecne odpovedal a nie pisal, ze jemu to ZVYKNE vypisat nejake 
hlasky inokedy ako mne. to nie je riesenie a na to som sa ani nepytal.

-- 

Peter J.

--- moj - web ---
http://www.pecko.sk

Generovane dna: Sun Jul 25 15:58:39 CEST 2004 na OS Linux 2.4.22