[linux] problem s prechodom na jadro 2.6.10rc1

Lubomir Host rajo na Idea.Platon.SK
Středa Říjen 27 17:33:16 CEST 2004


On Wed, Oct 27, 2004 at 04:50:37PM +0200, Lubomir Host wrote:
> ---------------------------------------------------------------%<---------------------------------------------------------------
> 2004-10-27 13:56:48 Hostname [warning] kernel: end_request: I/O error, dev hdc, sector 88078911
> 2004-10-27 13:56:49 Hostname [err] kernel: Buffer I/O error on device hdc7, logical block 23437824
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: error=0x04 { DriveStatusError }
> 2004-10-27 13:56:49 Hostname [warning] kernel: ide: failed opcode was: unknown
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: error=0x04 { DriveStatusError }
> 2004-10-27 13:56:49 Hostname [warning] kernel: ide: failed opcode was: unknown
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: error=0x04 { DriveStatusError }
> 2004-10-27 13:56:49 Hostname [warning] kernel: ide: failed opcode was: unknown
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> 2004-10-27 13:56:49 Hostname [warning] kernel: hdc: task_in_intr: error=0x04 { DriveStatusError }
> 2004-10-27 13:56:49 Hostname [warning] kernel: ide: failed opcode was: unknown
> 2004-10-27 13:56:49 Hostname [warning] kernel: ide1: reset: success
> ---------------------------------------------------------------%<---------------------------------------------------------------
> 
> V com moze byt problem? Chyba v jadre alebo v konfiguracii? Spominam
> si, ze kvoli starsiemu HW som musel zapinat v jadre volbu
> CONFIG_IDEDISK_STROKE.

Pri detailnejsom pohlade na novy .config som zistil, ze volba
CONFIG_IDEDISK_STROKE zmizla - v jadre vobec nie je. Je mozne rozbehat
nove jadro aj na starsom zeleze, kde bios nepodporuje velke disky?

rajo

-- 
Lubomir Host 'rajo' <rajo AT platon.sk>        ICQ #:  257322664
Platon Software Development Group              http://platon.sk/
http://www.gnu.org/philosophy/no-word-attachments.html




Další informace o konferenci linux