[linux] USB kluc a prechod na jadro 2.6.10
Kocur
kocur na zsvak.sk
Čtvrtek Únor 3 13:30:56 CET 2005
No...
ja mam na doske 4 VIA USB1.1
a 4 NEC USB 2.0 porty...
a obydva tieto radice mi zatial nefungovali na ziadnom kernely sucasne..
a ak v XPcku pripojim USB2.0 zariadenie do USB2.0 portu,
bud ho nenajde, alebo najde a kopirovane data su pokazene...
(to je ftom lepsom pripade....)
alebo mi "tvrdo" resetne comp..
na 2.4.x kerneloch mi ide alebo USB1.1 alebo USB2.0 radic..
na 2.6.x kelneloch je to podobne ako u 2.4.x..
s tym rozdielom, ze ak nahram obidva moduly aj pre USB1.1 aj pre USB2.0,
USB1.1 radic je "plne" funkcny, a USB2.0 iba zdanlivo...
..nedetekne totiz ze som pripojil zariadenie..
..a po odstraneni modulu pre USB1.1 sa USB2.0 rozbehne...
...(tos zahada...)...
----- Original Message -----
From: "Peter Fordinal" <pf2000 na inMail.sk>
To: "Vseobecna diskusia o Linuxe" <linux na lists.linux.sk>
Sent: Thursday, February 03, 2005 1:15 PM
Subject: Re: [linux] USB kluc a prechod na jadro 2.6.10
Ahoj, to na tom este nie si tak zle. Mne pod WinXP chcipnu USB kedy sa im
zachce
(vyborne ak ma clovek USB mys), pod MDK vsak no-problem.
PF
---- Original Message ----
Dakujem Rajovi za nakopnutie.
Takto mi to bezi spolahlivo na jadre 2.6.9. Predpokladam, ze na 2.6.10
by to bolo rovnako. Zatial som sa nedostal k uplnemu vyskusaniu.
USB kluc sa mi pripaja cez /dev/uba1
USB fotak sa mi pripaja cez /dev/sda1
Jedna divna vec je, ze na PC mam 6 USB portov. Podla verzie jadra mi vsak
vzdy funguju ine. Takze treba skusit pozapajat do roznych portov. Mozno
som si len zle nainstaloval maticnu dosku...
Napr. pri 2.4.22 mi v portoch vpredu fungoval USB kluc, ale nie USB
kabel od fotaku. Pri 2.6.9 mi vpredu nefunguje ani jeden.
BTW: Na WinXP/SP1 sa mi pravidelne po cca 2weeks uptime stane, ze uz mi
nezaregistruje zasunutie USB kluca. Musim urobit reboot.
Vojto
======================================================================
> mount | egrep "usb|scsi"
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sda1 on /mnt/scsi1 type vfat (ro)
/dev/uba1 on /mnt/usbkluc type vfat (ro)
-----------------------------
> lsmod | grep -v snd
Module Size Used by
sg 34704 0
ub 17756 2
sd_mod 16000 2
usb_storage 43328 1
scsi_mod 84644 3 sg,sd_mod,usb_storage
uhci_hcd 33672 0
loop 16008 4
nls_iso8859_2 4544 6
nls_cp852 4800 4
autofs 17280 1
ehci_hcd 43456 0
usbcore 130836 6 ub,usb_storage,uhci_hcd,ehci_hcd
-----------------------------
> cdrecord -scanbus
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Using libscg version 'schily-0.7'
scsibus1:
1,0,0 100) 'Sony ' 'Sony DSC ' '4.10' Removable Disk
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
-----------------------------
> cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9linuxak uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
S: SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9linuxak uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
S: SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0010 Rev= 4.10
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9linuxak uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
S: SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9linuxak ehci_hcd
S: Product=VIA Technologies, Inc. USB 2.0
S: SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1005 ProdID=b113 Rev= 1.00
S: Product=USB Flash Drive
S: SerialNumber=070200010890980
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=ub
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-----------------------------
======================================================================
Dna Thu, Jan 27, 2005, Vojtech Zachar napisal:
>
> Bezim to uz na 2.6.10 - na rovnakej kombinacii modulov ako som pisal
> minule pre 2.6.9
>
> Nie je to vsak to prave, lebo ako ty pises, inac sa mi sprava fotak nez
> kluc.
> Pre fotak funguje len usb-storage
> Pre USB kluc mi funguje iba ub
>
> Vojto
>
> Dna Thu, Jan 20, 2005, Lubomir Host napisal:
> > From: Lubomir Host <rajo na platon.sk>
> > To: Vseobecna diskusia o Linuxe <linux na lists.linux.sk>
> > Subject: Re: [linux] USB kluc a prechod na jadro 2.6.10
> > Reply-To: rajo na platon.sk,
> > Vseobecna diskusia o Linuxe <linux na lists.linux.sk>
> >
> > Caute,
> >
> > prave som zistil jednu zaujimavu vec. Ak pripojim cez USB kabel
> > digitalny fotak, tak sa mi vytvori normalne zariadenie /dev/sda1 aj
> > mozem skopirovat fotky. Vid dmesg:
> >
> > ---------------------------------%<---------------------------------
> > usb 2-1: new full speed USB device using uhci_hcd and address 2
> > scsi0 : SCSI emulation for USB Mass Storage devices
> > usb-storage: device found at 2
> > usb-storage: waiting for device to settle before scanning
> > Vendor: MINOLTA Model: DiMAGE G400 Rev: 1.00
> > Type: Direct-Access ANSI SCSI revision: 00
> > usb-storage: device scan complete
> > SCSI device sda: 250880 512-byte hdwr sectors (128 MB)
> > sda: Write Protect is off
> > sda: Mode Sense: bc 00 00 bc
> > sda: assuming drive cache: write through
> > SCSI device sda: 250880 512-byte hdwr sectors (128 MB)
> > sda: Write Protect is off
> > sda: Mode Sense: bc 00 00 bc
> > sda: assuming drive cache: write through
> > sda: sda1
> > Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> > usb 2-1: USB disconnect, address 2
> > ---------------------------------%<---------------------------------
> >
> > Ak vsak pripojim do toho isteho portu USB kluc, deje sa toto:
> >
> > -------------------------------%<-------------------------------
> > usb 2-1: USB disconnect, address 2
> > usb 4-3: new high speed USB device using ehci_hcd and address 3
> > usb 4-3: khubd timed out on ep0in
> > usb 4-3: khubd timed out on ep0out
> > usb 4-3: khubd timed out on ep0out
> > usb 4-3: device not accepting address 3, error -110
> > usb 4-3: new high speed USB device using ehci_hcd and address 4
> > usb 4-3: khubd timed out on ep0in
> > usb 4-3: khubd timed out on ep0out
> > usb 4-3: khubd timed out on ep0out
> > usb 4-3: device not accepting address 4, error -110
> > -------------------------------%<-------------------------------
> >
> > Kde moze byt zadrhel? Bezi uz niekto na jadre 2.6.10 a pouziva USB kluc?
> > Moze niekto poslat konfigurak jadra?
> >
> > Diik, rajo
> >
> > On Mon, Jan 10, 2005 at 10:16:35PM +0100, Lubomir Host wrote:
> > > On Mon, Jan 10, 2005 at 09:55:25PM +0100, Vojtech Zachar wrote:
> > > > Huh, caf rajo.
> > > >
> > > > Prave tento vikend som sa s tym hral. Po dlhom case 2.4.26 --->
> > > > 2.6.9
> > > > kernel. Predpokladam, ze s 2.6.10 to bude to iste.
> > > > usb-storage, scsi_mod, sg a dalsie mi vobec nefungovalo (s 2.4.26
> > > > bez
> > > > problemov) - cca hlasky na ten tvoj sposob.
> > > > Naopak UB funguje. Major num som nasiel v ub.c (tusim 125) a tiez sa
> > > > v
tom kode
> > > > pisalo, ze su to osmice. Kedze som stary koder (rozumej v cc
> > > > nenapisem
> > > > ani Hello world!), ... Skratim to.
> > > >
> > > > mknod /dev/uba b 125 0
> > > > mknod /dev/uba1 b 125 1
> > > > Neskusal som, ale predpokladam, ze:
> > > > mknod /dev/ubb b 125 9
> > > > mknod /dev/ubb1 b 125 10
> > > >
> > > > Teraz si nie som isty, ci block alebo char. Ale asi block.
> > > >
> > > > Moduly su usbcore, ehci-hcd a ub (nic viac netreba ohladom USB
> > > > kluca).
> > > > Najprv mi to neficalo pri opakovanom vsunuti USB kluca, ale teraz,
> > > > ked
> > > > po kazdom vybrati robim rmmod ub, tak to fici OK.
> > > > Sice sa mi stale nepodarilo dosiahnut 480mb (stale iba 12), ale
> > > > aspon
> > > > nieco.
> >
> > --
> > Lubomir Host 'rajo' <rajo AT platon.sk> ICQ #: 257322664
> > Platon Software Development Group http://platon.sk/
> > GnuPG key: http://rajo.platon.sk/en/?show=gpgkey
> > Encrypt your plaintext emails with GnuPG/PGP/OpenPGP:
> > http://platon.sk/cvs/cvs.php/scripts/perl/mail-gnupg/mail-gnupg-encrypt.pl
> > http://www.gnu.org/philosophy/no-word-attachments.html
> >
> > _______________________________________________
> > http://lists.linux.sk/listinfo/linux
> > Prehladavanie archivu: http://search.lists.linux.sk
> > Meta FAQ: http://faq.lists.linux.sk
_______________________________________________
http://lists.linux.sk/listinfo/linux
Prehladavanie archivu: http://search.lists.linux.sk
Meta FAQ: http://faq.lists.linux.sk
----------
* www.inMail.sk - Vasa emailova adresa na cely zivot ZDARMA
* www.SlovakNET.sk - profesionalny webhosting, domena .SK ZADARMO
* www.inshop.sk - virtualna obchodna galeria s viac ako 230 obchodmi!
_______________________________________________
http://lists.linux.sk/listinfo/linux
Prehladavanie archivu: http://search.lists.linux.sk
Meta FAQ: http://faq.lists.linux.sk
Další informace o konferenci linux