[linux] USB Card Reader

[Lubomir Host]

Tvoje problemy mozno suvisia s tymi, co mam ja. Este stale to nie je
u mna uspokojivo vyriesenie. Skus sa pozriet na diskusiu, ktora sa
odohrala v tomto mailingliste od 2005-01-10 do 2005-02-03. Hladaj spravy
s predmetom "USB kluc a prechod na jadro 2.6.10".

rajo

On Sat, Feb 05, 2005 at 03:45:51PM +0100, Michal Tarana wrote:
> Ahojte,
> ^^^^^^^
> 
> ja a USB zariadenia pod Linuxom, to je vzdy riadny western:
> 
> Mam USB citacku pamatovych kariet kombinovanu 4v1. Ked to pichnem do
> Debianu (kernel-2.6.10), dostanem do dmesg:
> 
> hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
> hub 2-0:1.0: state 5 ports 3 chg fff8 evt 0002
> ohci_hcd 0000:00:01.3: GetStatus roothub.portstatus [0] = 0x00010101 CSC
> PPS CCShub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:01.3: GetStatus roothub.portstatus [0] = 0x00100103
> PRSC PPS PES CCS
> usb 2-1: new full speed USB device using ohci_hcd and address 3
> ohci_hcd 0000:00:01.3: GetStatus roothub.portstatus [0] = 0x00100103
> PRSC PPS PES CCS
> usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-1: default language 0x0409
> usb 2-1: Product: USB 8-in-1 Card Reader
> usb 2-1: Manufacturer: OTi
> usb 2-1: SerialNumber: 0123456789abcdef
> usb 2-1: hotplug
> usb 2-1: adding 2-1:1.0 (config #1, interface 0)
> usb 2-1:1.0: hotplug
> usb-storage 2-1:1.0: usb_probe_interface
> usb-storage 2-1:1.0: usb_probe_interface - got id
> scsi1 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 3
> usb-storage: waiting for device to settle before scanning
>   Vendor: OTi       Model: CF CARD Reader    Rev: 2.00
>   Type:   Direct-Access                      ANSI SCSI revision: 00
> Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
> usb-storage: device scan complete
> 
> Ale vnutri uz mam kartu, ktoru to zariadenie z nejakeho dovodu nevidi.
> Na jej zasunutie, vysunutie system vobec nereaguje. Pod Windows to islo
> dobre. Ked skusim akokolvek pristupovat na tu kartu (primontovat, dalebo
> cokolvek ine), dostanem hlasku: Nenajdene ziadne medium. Neviem,
> nestretol sa s tym uz niekto nahodou? Ak ano, velmi by ma potesila
> nejaka rada. Tentoraz to nie nieco typu zle zasunuty kabel:-). Mam
> podporu pre usb-storage, scsi-disk a scsi-generic device.
> 
> Dakujem a prajem prijemny den vsetkym.
> 
> Michal

-- 
Lubomir Host 'rajo' <rajo AT platon.sk>        ICQ #:  257322664
Platon Software Development Group              http://platon.sk/
GnuPG key: http://rajo.platon.sk/en/?show=gpgkey
Encrypt your plaintext emails with GnuPG/PGP/OpenPGP:
http://platon.sk/cvs/cvs.php/scripts/perl/mail-gnupg/mail-gnupg-encrypt.pl
http://www.gnu.org/philosophy/no-word-attachments.html