[linux] Adaptec ASC-29320LP U320

[Kocur]

..caff...

Skusit vypnut APIC / ACPI v BIOSe..??
prip. sa pohrat z Power Managementom..
aky ten radic neskocil v stave: " kernel: Card was paused "

prip. skusit pridat kelnelu opions  noapic acpi=off

mozno to zabere...


----- Original Message ----- 
From: "Sona Novosadova" <sona_novosadova na ses.sk>
To: <linux na lists.linux.sk>
Sent: Friday, February 18, 2005 8:34 AM
Subject: [linux] Adaptec ASC-29320LP U320


> Ahojte,
>
> prosim, poradte mi s nasledovnym problemom:
>
> Mam stroj s externymi SCSI diskami (2 identicke SEAGATE   Model: 
> ST373307LW) pripojene cez radic
> Adaptec ASC-29320LP U320. Bezi tam Debian (Sarge) so standardnym jadrom 
> (2.6.8). Systemovy disk
> je interny SATA.
>
> Par dni vsetko vyzeralo, ze to bezi OK, ale potom nastane situacia, kedy 
> subory
> na externych diskoch nie su viditelne. Ako keby tie disky vobec neboli. 
> Nepomoze ani
> odmontovat/namontovat, da sa uz len restartnut cely stroj.
> Googlujem uz par dni, ale este som nic pouzitelne nenasla :-(
>
> V kern.logu je hlaska:
>
> kernel: scsi2: Transmission error detected
> kernel: LQISTAT1[0x8]:(LQICRCI_NLQ) LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
> kernel: SCSISIGI[0x60]:(P_DATAIN_DT) PERRDIAG[0x4]:(CRCERR)
> kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> kernel: scsi2: Dumping Card State at program address 0x94 Mode 0x22
> kernel: Card was paused
> kernel: HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
> kernel: SAVED_MODE[0x11] DFFSTAT[0x11]:(CURRFIFO_1|FIFO0FREE)
> kernel: SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) 
> SCSIPHASE[0x2]:(DATA_IN_PHASE)
> kernel: SCSIBUS[0xf9] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
> kernel: SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
> kernel: SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x80]:(INTVEC1DSL)
> kernel: SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0]
> kernel: SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE) SSTAT2[0x0]
> kernel: SSTAT3[0x0] PERRDIAG[0x0] 
> SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
> kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
> kernel: LQOSTAT1[0x0] LQOSTAT2[0x81]:(LQOSTOP0)
> kernel:
> kernel: SCB Count = 64 CMDS_PENDING = 1 LASTSCB 0x22 CURRSCB 0x22 NEXTSCB 
> 0xff40
> kernel: qinstart = 8607 qinfifonext = 8607
> kernel: QINFIFO:
> kernel: WAITING_TID_QUEUES:
> kernel: Pending list:
> kernel:  34 FIFO_USE[0x1] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) 
> SCB_SCSIID[0x27]
> kernel: Total 1
> kernel: Kernel Free SCB list: 36 57 8 45 62 23 41 32 60 48 56 61 9 6 37 7 
> 40 4 27 28 49 55 16 25 29
> 43 10 22 50 46 5 54 21 14 30 38 52 31 24 2 59 53 63 58 13 19 42 15 44 3 33 
> 1 17 26 20 51 39 12 0 11
> 35 47 18
> kernel: Sequencer Complete DMA-inprog list:
> kernel: Sequencer Complete list:
> kernel: Sequencer DMA-Up and Complete list:
> kernel:
> kernel: scsi2: FIFO0 Free, LONGJMP == 0x825e, SCB 0x22
> kernel: 
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
> kernel: SEQINTSRC[0x0] DFCNTRL[0x0] 
> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> kernel: SOFFCNT[0x7e] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT 
> = 0x0
> kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x0]
> kernel: scsi2: FIFO1 Active, LONGJMP == 0x257, SCB 0x22
> kernel: 
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
> kernel: SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
> DFSTATUS[0xce]:(FIFOFULL|DFTHRESH|HDONE|PKT_PRELOAD_AVAIL|PRELOAD_AVAIL)
> kernel: SG_CACHE_SHADOW[0x68] SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED)
> kernel: DFFSXFRCTL[0x0] SOFFCNT[0x7e] MDFFSTAT[0x2]:(DATAINFIFO)
> kernel: SHADDR = 0x077ba1704, SHCNT = 0xfff8fc HADDR = 0x077ba1000, HCNT = 
> 0x0
> kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> kernel: LQIN: 0x5 0x0 0x0 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
> 0x80 0x0 0x0 0x0 0x2 0x0
> kernel: scsi2: LQISTATE = 0x21, LQOSTATE = 0x0, OPTIONMODE = 0x42
> kernel: scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
> kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
> kernel: CCSCBCTL[0x4]:(CCSCBDIR)
> kernel: scsi2: REG0 == 0x22, SINDEX = 0x133, DINDEX = 0x106
> kernel: scsi2: SCBPTR == 0xff22, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
> kernel: CDB 22 1 0 0 0 0
> kernel: STACK: 0x1 0x14 0x14 0x125 0x25e 0x257 0x240 0x29
> kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> kernel: DevQ(0:1:0): 0 waiting
> kernel: DevQ(0:2:0): 0 waiting
> kernel: LQICRC_NLQ
> kernel: LQIRETRY for LQIPHASE_NLQ
> kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> kernel: scsi2: Dumping Card State at program address 0x25 Mode 0x0
> kernel: Card was paused
> kernel: HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
>
>
> dalej sa ta hlaska opakuje stale dokola asi 5-10 minut a za tym nasleduje
>
> kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> kernel: DevQ(0:1:0): 0 waiting
> kernel: DevQ(0:2:0): 0 waiting
> kernel: scsi2:0:1:0: Cmd aborted from QINFIFO
> kernel: Recovery code sleeping
> kernel: Recovery code awake
> kernel: Timer Expired
> kernel: scsi2: Device reset returning 0x2003
> kernel: Recovery code sleeping
> kernel: Recovery code awake
> kernel: Timer Expired
> kernel: scsi2: Device reset returning 0x2003
> kernel: Recovery SCB completes
> last message repeated 2 times
> kernel: scsi: Device offlined - not ready after error recovery: host 2 
> channel 0 id 2 lun 0
> kernel: scsi: Device offlined - not ready after error recovery: host 2 
> channel 0 id 1 lun 0
> SCSI error : <2 0 1 0> return code = 0x6000000
> kernel: end_request: I/O error, dev sdb, sector 262232
> kernel: Buffer I/O error on device sdb1, logical block 32775
> kernel: lost page write due to I/O error on sdb1
> kernel: scsi2 (1:0): rejecting I/O to offline device
> ...
> SCSI error : <2 0 1 0> return code = 0x6000000
> kernel: end_request: I/O error, dev sdb, sector 2621488
> ...
> kernel: scsi2 (2:0): rejecting I/O to offline device
> last message repeated 6 times
> kernel: scsi2 (1:0): rejecting I/O to offline device
> last message repeated 27 times
> kernel: Aborting journal on device sdb2.
> kernel: ext3_reserve_inode_write: aborting transaction: Journal has 
> aborted in
> __ext3_journal_get_write_access<2>EXT3-fs error (device sdb2) in 
> ext3_reserve_inode_write: Journal
> has aborted
> kernel: scsi2 (1:0): rejecting I/O to offline device
> kernel: EXT3-fs error (device sdb2) in ext3_dirty_inode: Journal has 
> aborted
> kernel: scsi2 (1:0): rejecting I/O to offline device
> kernel: ext3_abort called.
>
>
> Neviete, co by to mohlo sposobovat?
>
> Dakujem za kazdu radu.
>
> Sona
>
> _______________________________________________
> http://lists.linux.sk/listinfo/linux
> Prehladavanie archivu: http://search.lists.linux.sk
> Meta FAQ: http://faq.lists.linux.sk
>