[linux] Adaptec ASC-29320LP U320

[Kocur]

Mne to zatial zaberalo na kazdom radici od ADAPTECu,
ci SIL SATA radicoch....


----- Original Message ----- 
From: "Sona Novosadova" <sona_novosadova na ses.sk>
To: <linux na lists.linux.sk>
Sent: Friday, February 18, 2005 11:24 AM
Subject: Re: [linux] Adaptec ASC-29320LP U320


>
> acpi=off som pridala este vcera, zatial to bezi, len som si nebola ista
> ci je to to prave ...
>
> Skusim teda este to noapic.
>
> Dik za radu.
>
>
>> Message: 7
>> Date: Fri, 18 Feb 2005 10:02:50 +0100
>> From: "Kocur" <kocur na zsvak.sk>
>> Subject: Re: [linux] Adaptec ASC-29320LP U320
>> To: "Vseobecna diskusia o Linuxe" <linux na lists.linux.sk>
>> Message-ID: <012901c51598$9fe27d40$0401a8c0 na vskocur>
>> Content-Type: text/plain; format=flowed; charset="ISO-8859-1";
>>         reply-type=original
>>
>> ..caff...
>>
>> Skusit vypnut APIC / ACPI v BIOSe..??
>> prip. sa pohrat z Power Managementom..
>> aky ten radic neskocil v stave: " kernel: Card was paused "
>>
>> prip. skusit pridat kelnelu opions  noapic acpi=off
>>
>> mozno to zabere...
>>
>> ----- Original Message -----
>> From: "Sona Novosadova" <sona_novosadova na ses.sk>
>> To: <linux na lists.linux.sk>
>> Sent: Friday, February 18, 2005 8:34 AM
>> Subject: [linux] Adaptec ASC-29320LP U320
>>
>> > Ahojte,
>> >
>> > prosim, poradte mi s nasledovnym problemom:
>> >
>> > Mam stroj s externymi SCSI diskami (2 identicke SEAGATE   Model:
>> > ST373307LW) pripojene cez radic
>> > Adaptec ASC-29320LP U320. Bezi tam Debian (Sarge) so standardnym jadrom
>> > (2.6.8). Systemovy disk
>> > je interny SATA.
>> >
>> > Par dni vsetko vyzeralo, ze to bezi OK, ale potom nastane situacia, 
>> > kedy
>> > subory
>> > na externych diskoch nie su viditelne. Ako keby tie disky vobec neboli.
>> > Nepomoze ani
>> > odmontovat/namontovat, da sa uz len restartnut cely stroj.
>> > Googlujem uz par dni, ale este som nic pouzitelne nenasla :-(
>> >
>> > V kern.logu je hlaska:
>> >
>> > kernel: scsi2: Transmission error detected
>> > kernel: LQISTAT1[0x8]:(LQICRCI_NLQ) 
>> > LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
>> > kernel: SCSISIGI[0x60]:(P_DATAIN_DT) PERRDIAG[0x4]:(CRCERR)
>> > kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
>> > kernel: scsi2: Dumping Card State at program address 0x94 Mode 0x22
>> > kernel: Card was paused
>> > kernel: HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
>> > kernel: SAVED_MODE[0x11] DFFSTAT[0x11]:(CURRFIFO_1|FIFO0FREE)
>> > kernel: SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI)
>> > SCSIPHASE[0x2]:(DATA_IN_PHASE)
>> > kernel: SCSIBUS[0xf9] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
>> > kernel: SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
>> > kernel: SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x80]:(INTVEC1DSL)
>> > kernel: SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0]
>> > kernel: SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE) SSTAT2[0x0]
>> > kernel: SSTAT3[0x0] PERRDIAG[0x0]
>> > SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
>> > kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
>> > kernel: LQOSTAT1[0x0] LQOSTAT2[0x81]:(LQOSTOP0)
>> > kernel:
>> > kernel: SCB Count = 64 CMDS_PENDING = 1 LASTSCB 0x22 CURRSCB 0x22 
>> > NEXTSCB
>> > 0xff40
>> > kernel: qinstart = 8607 qinfifonext = 8607
>> > kernel: QINFIFO:
>> > kernel: WAITING_TID_QUEUES:
>> > kernel: Pending list:
>> > kernel:  34 FIFO_USE[0x1] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB)
>> > SCB_SCSIID[0x27]
>> > kernel: Total 1
>> > kernel: Kernel Free SCB list: 36 57 8 45 62 23 41 32 60 48 56 61 9 6 37 
>> > 7
>> > 40 4 27 28 49 55 16 25 29
>> > 43 10 22 50 46 5 54 21 14 30 38 52 31 24 2 59 53 63 58 13 19 42 15 44 3 
>> > 33
>> > 1 17 26 20 51 39 12 0 11
>> > 35 47 18
>> > kernel: Sequencer Complete DMA-inprog list:
>> > kernel: Sequencer Complete list:
>> > kernel: Sequencer DMA-Up and Complete list:
>> > kernel:
>> > kernel: scsi2: FIFO0 Free, LONGJMP == 0x825e, SCB 0x22
>> > kernel:
>> > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
>> > kernel: SEQINTSRC[0x0] DFCNTRL[0x0]
>> > DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
>> > kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
>> > kernel: SOFFCNT[0x7e] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, 
>> > SHCNT
>> > = 0x0
>> > kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x0]
>> > kernel: scsi2: FIFO1 Active, LONGJMP == 0x257, SCB 0x22
>> > kernel:
>> > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
>> > kernel: SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
>> > DFSTATUS[0xce]:(FIFOFULL|DFTHRESH|HDONE|PKT_PRELOAD_AVAIL|PRELOAD_AVAIL)
>> > kernel: SG_CACHE_SHADOW[0x68] SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED)
>> > kernel: DFFSXFRCTL[0x0] SOFFCNT[0x7e] MDFFSTAT[0x2]:(DATAINFIFO)
>> > kernel: SHADDR = 0x077ba1704, SHCNT = 0xfff8fc HADDR = 0x077ba1000, 
>> > HCNT =
>> > 0x0
>> > kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL)
>> > kernel: LQIN: 0x5 0x0 0x0 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
>> > 0x80 0x0 0x0 0x0 0x2 0x0
>> > kernel: scsi2: LQISTATE = 0x21, LQOSTATE = 0x0, OPTIONMODE = 0x42
>> > kernel: scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
>> > kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
>> > kernel: CCSCBCTL[0x4]:(CCSCBDIR)
>> > kernel: scsi2: REG0 == 0x22, SINDEX = 0x133, DINDEX = 0x106
>> > kernel: scsi2: SCBPTR == 0xff22, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
>> > kernel: CDB 22 1 0 0 0 0
>> > kernel: STACK: 0x1 0x14 0x14 0x125 0x25e 0x257 0x240 0x29
>> > kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
>> > kernel: DevQ(0:1:0): 0 waiting
>> > kernel: DevQ(0:2:0): 0 waiting
>> > kernel: LQICRC_NLQ
>> > kernel: LQIRETRY for LQIPHASE_NLQ
>> > kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
>> > kernel: scsi2: Dumping Card State at program address 0x25 Mode 0x0
>> > kernel: Card was paused
>> > kernel: HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
>> >
>> >
>> > dalej sa ta hlaska opakuje stale dokola asi 5-10 minut a za tym 
>> > nasleduje
>> >
>> > kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
>> > kernel: DevQ(0:1:0): 0 waiting
>> > kernel: DevQ(0:2:0): 0 waiting
>> > kernel: scsi2:0:1:0: Cmd aborted from QINFIFO
>> > kernel: Recovery code sleeping
>> > kernel: Recovery code awake
>> > kernel: Timer Expired
>> > kernel: scsi2: Device reset returning 0x2003
>> > kernel: Recovery code sleeping
>> > kernel: Recovery code awake
>> > kernel: Timer Expired
>> > kernel: scsi2: Device reset returning 0x2003
>> > kernel: Recovery SCB completes
>> > last message repeated 2 times
>> > kernel: scsi: Device offlined - not ready after error recovery: host 2
>> > channel 0 id 2 lun 0
>> > kernel: scsi: Device offlined - not ready after error recovery: host 2
>> > channel 0 id 1 lun 0
>> > SCSI error : <2 0 1 0> return code = 0x6000000
>> > kernel: end_request: I/O error, dev sdb, sector 262232
>> > kernel: Buffer I/O error on device sdb1, logical block 32775
>> > kernel: lost page write due to I/O error on sdb1
>> > kernel: scsi2 (1:0): rejecting I/O to offline device
>> > ...
>> > SCSI error : <2 0 1 0> return code = 0x6000000
>> > kernel: end_request: I/O error, dev sdb, sector 2621488
>> > ...
>> > kernel: scsi2 (2:0): rejecting I/O to offline device
>> > last message repeated 6 times
>> > kernel: scsi2 (1:0): rejecting I/O to offline device
>> > last message repeated 27 times
>> > kernel: Aborting journal on device sdb2.
>> > kernel: ext3_reserve_inode_write: aborting transaction: Journal has
>> > aborted in
>> > __ext3_journal_get_write_access<2>EXT3-fs error (device sdb2) in
>> > ext3_reserve_inode_write: Journal
>> > has aborted
>> > kernel: scsi2 (1:0): rejecting I/O to offline device
>> > kernel: EXT3-fs error (device sdb2) in ext3_dirty_inode: Journal has
>> > aborted
>> > kernel: scsi2 (1:0): rejecting I/O to offline device
>> > kernel: ext3_abort called.
>> >
>> >
>> > Neviete, co by to mohlo sposobovat?
>> >
>> > Dakujem za kazdu radu.
>> >
>> > Sona
>> >
>
> _______________________________________________
> http://lists.linux.sk/listinfo/linux
> Prehladavanie archivu: http://search.lists.linux.sk
> Meta FAQ: http://faq.lists.linux.sk
>