[linux] mrtg, ipfm

[Lubo Klorus]

Viktor Kocan wrote:

> Ahoj,
> mrtg potrebuje pre vykreslenie grafu 4 udaje, z toho prve 2 su data 
> pre graf (In, Out) a zvysne su uptime a
> hostname. Tieto udaje ziskava zo scriptov.
> Ak chces zistit ci script funguje, staci ho spustit a mal byt ti 
> vsetky 4 udaje vypisat na obrazovku.
>
> Viktor

Ahoj
dik za odpoved, skript som spustil. Je iste ze nefunguje. Poskytne mi 
niekto taky skript?
Lubo

>
>
> Lubo Klorus wrote:
>
>> Zdravim
>> v debiane stable chcem nakonfigurovat  mrtg, tak aby  boli zobrazene 
>> grafy pre IP z vnutornej siete. Grafy eth0 a eth1, ktore su na 
>> routeri su zobrazovane a mrtg ich vykresluje z mntpd. Pokial som sa 
>> dobre docital tak ip z vnutornej siete moze mrtg vykreslit pomocou ipfm.
>> v ipfm.conf mam
>>
>> DEVICE eth1
>> LOG 192.168.1.0/255.255.255.0 WITH 192.168.1.0/255.255.0.0
>> FILENAME "/var/log/ipfm/eth1"
>> DUMP 5 minutes
>> CLEAR EVERY 24 hour
>> SORT TOTAL
>> RESOLVE
>>
>> do /var/log/ipfm/eth1 zapisuje
>>
>> # IPFMv0.11.5 2006/06/30 07:00:00 (local time) -- dump every 
>> 0d00:05:00 -- listening on eth1
>> # Host                                  In (bytes)    Out (bytes)  
>> Total (bytes)
>> 192.168.1.5                                  34426         
>> 432230         466656
>> 192.168.1.20                                381175          
>> 24350         405525
>> 192.168.1.255                                98508            
>> 240          98748
>> 192.168.1.24                                 27370          
>> 12955          40325
>> 192.168.1.52                                  3160          
>> 23533          26693
>> 192.168.1.31                                   324          
>> 22352          22676
>> 192.168.1.16                                  2814          
>> 14647          17461
>> 192.168.1.14                                  4632          
>> 12386          17018
>> 192.168.1.25                                  4387           
>> 6000          10387
>> 192.168.1.48                                  1343           
>> 7608           8951
>> 192.168.1.21                                  3809           
>> 5125           8934
>> 192.168.1.13                                  1264           
>> 2358           3622
>> 192.168.1.10                                   324            
>> 492            816
>> # end of dump 2006/06/30 07:00:00
>>
>>
>> Do /etc/mrtg.crg  pridam
>>
>> Target[host20]: `/etc/mrtg/mrtg-ipfm2 192.168.1.20`
>> Options[host20]: bits, growright
>> SetEnv[host20]: MRTG_INT_IP="192.168.1.20" MRTG_INT_DESCR="eth1"
>> MaxBytes[host20]: 1250000
>> Title[host20]: Traffic Analysis for 192.168.1.20
>> PageTop[host20]: <H1>Traffic Analysis for 192.168.1.20</H1>
>> <TABLE>
>>   <TR><TD>System:</TD>     <TD>D49</TD></TR>
>>   <TR><TD>Maintainer:</TD> <TD>Root &lt;root na localhost&gt; (configure 
>> /etc/snmp/snmpd.local.conf
>>   <TR><TD>Description:</TD><TD>192.168.1.20 to eth1</TD></TR>
>>   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
>>   <TR><TD>ifName:</TD>     <TD></TD></TR>
>>   <TR><TD>Max Speed:</TD>  <TD>10000 kBytes/s</TD></TR>
>>   <TR><TD>Ip:</TD><TD>192.168.1.20 ()</TD></TR>
>> </TABLE>
>>
>> #indexmaker /etc/mrtg.cfg > /var/www/mrtg/index.html
>>
>> Graf je zobrazeny ale prazdny. Problem je zrejme v perl skripte 
>> mrtg-ipfm2, ktory by mal data z /var/log/ipfm/eth1 spracovat pre 
>> mrtg. Neviem co ma byt v tom skripte. Tento co tam mam som niekde 
>> nasiel na nete.
>> grafy http://d49.demax.sk/mrtg
>> skript http://d49.demax.sk/help/
>>
>> Poradte aky skript mam pouzit, alebo kde je chyba?
>> Dakujem Lubomir Klorus
>>
>> _______________________________________________
>> https://lists.linux.sk/mailman/listinfo/linux
>> Prehladavanie archivu: http://search.lists.linux.sk
>> Meta FAQ: http://www.sklug.sk/lists/linux/metafaq.html
>
>
> _______________________________________________
> https://lists.linux.sk/mailman/listinfo/linux
> Prehladavanie archivu: http://search.lists.linux.sk
> Meta FAQ: http://www.sklug.sk/lists/linux/metafaq.html
>