[linux] USB UPS MGE ELLIPSE 1000

[Andrej Neština]

Zdravim,

Mam problem s UPS MGE ELIPSE 1000
Je pripojena cez USB, pouzivam soft PSP od MGE a nut
Distro Etch

lsusb
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0463:ffff MGE UPS Systems UPS
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

lsusb -v -s 002:002

Bus 002 Device 002: ID 0463:ffff MGE UPS Systems UPS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0463 MGE UPS Systems
  idProduct          0xffff UPS
  bcdDevice           42.41
  iManufacturer           1 MGE UPS SYSTEMS
  iProduct                2 ELLIPSE
  iSerial                 4 1H6G1104M
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               20mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode           33 US
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     769
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              20
Device Status:     0x0001
  Self Powered

dmesg
usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255
ret -110
usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255
ret -110
usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255
ret -110
usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255
ret -110


cat /etc/nut/ups.conf
# Generated by MGE UPS SYSTEMS - Personal Solution Pac (mgeups-psp, version
3.0.2)

[mgeups]
        driver = newhidups
        port = auto
        desc = "Computer Room"

v xface mi ide zobrazenie psp v poriadku, ale ked odpojim 230v od ups
zobrazi status ze je na baterke.
Ale status mi neukazuje vybijanie UPS, ani cas.
Hlavne nemam sajnu co vypisuje dmesg.

 
Andrej