[linux] problem s aktualizaciou CentOS

Milan Plzik emempi na gmail.com
Středa Březen 31 10:05:36 CEST 2010


V Utorok, 30. marec 2010 o 16:02 +0200, Stefan Skoda napísal(a):
> Nazdar,
> 
> Dakujem za rady, tu je rekapitulacia co sa stalo:
> 
> Z nejakeho dovodu som mal poskodeny filesystem na roote.
> Ja som pozeral file atributy, mount, /etc/mtab, ale ten problem tam
> nikde nebolo vidno, len v /proc/mounts bolo ze /dev/root je readonly
> takze som musel do singleuser modu a tam spustit fsck -f
> Teraz ma caka zistovanie preco, sa mi root filesystem kazi.

  "Sa kazi" je dot vseobecny az alibisticky nazov pre problem ;).
Filesystem sa sam remountne do r/o rezimu, ak sa vyskytne nejaky problem
a dalsimi zapismi by mohlo dojst ku poskodeniu dat. Prve, co by som
pozrel, je vypis zo smartctl -a /dev/sda (alebo spravne zariadenie pre
disk, na ktorom je root filesystem) a skontroloval pocty relokovanych
sektorov. Dalej sa oplati pozriet do /var/log/messages; mozno  uz
predtym, ako sa filesystem remountol, sa objavili nejake chyby.

> 
> Stevo Skoda

	Milan Plzik

> 
> On Tue, 30 Mar 2010, Lubomir Host wrote:
> 
> > A nemas nahodou read-only root filesystem? A tiez plny /tmp?
> > 
> > Skus vycistit /tmp a remount rootfs do rw modu:
> > 
> > mount -o remount,rw /
> > 
> > rajo
> > 
> > On Tue, Mar 30, 2010 at 01:13:11PM +0200, Stefan Skoda wrote:
> > > Zdravim,
> > > 
> > > pri pokuse aktualizovat CenOS 5.4, mi zacalo vypisovat mnozstvo chybovych 
> > > hlaseni.
> > > Pri predchadzajucej aktualizacii vsetko este bezalo bez problemov.
> > > Najprv skusal standardne vycistit cache, lebo som myslel, ze bolo daco so 
> > > stahnutymi balickami, skusal som preinstalovat dane balicky, apod.,
> > > ale moje pokusy to dat do poriadku zda sa nikam neviedli, akurat casom
> > > pribudli dalsie balicky, ktore nejdu aktualizovat a dalsie hlasnia.
> > > 
> > > Na internete som nasiel par podobnych hlaseni problemov, ale zatial bez
> > > riesenia a svojimi experimentami som to zjavne este viac domrvil.
> > > Vie mi niekdo poradit, aku som spravil chybu, aby som sa tomu vyhol v 
> > > buducnosti a pripadne postup ako to dat zas do poriadku, bez 
> > > preinstalovania celeho systemu, lebo aktualny stav vyzera hrozne.
> > > 
> > > Prikladam aktualny vypis pokusu aktualizacie.
> > > 
> > > S pozdravom
> > > 
> > > Stevo Skoda
> > > 
> > > 
> > > 
> > > 
> > > 
> > > Running Transaction
> > >   Updating       : nspr                                                                                                                
> > > 1/64
> > > error: %post(nspr-4.8.4-1.el5_4.x86_64) scriptlet failed, exit status 1
> > >   Updating       : openssl                                                                                                             
> > > 2/64
> > > Error unpacking rpm package openssl-0.9.8e-12.el5_4.6.x86_64
> > > error: unpacking of archive failed on file /etc/pki/CA: cpio: lsetfilecon
> > >   Updating       : cyrus-sasl-lib                                                                                                      
> > > 3/64
> > > Error unpacking rpm package cyrus-sasl-lib-2.1.22-5.el5_4.3.x86_64
> > > error: unpacking of archive failed on file /etc/sasl2: cpio: lsetfilecon
> > >   Updating       : nss                                                                                                                 
> > > 4/64
> > > Error unpacking rpm package nss-3.12.6-1.el5.centos.x86_64
> > > error: unpacking of archive failed on file /etc/pki/nssdb: cpio: 
> > > lsetfilecon
> > >   Updating       : cyrus-sasl-plain                                                                                                    
> > > 5/64
> > >   Updating       : cyrus-sasl-md5                                                                                                      
> > > 6/64
> > >   Updating       : httpd                                                                                                               
> > > 7/64
> > > Error unpacking rpm package httpd-2.2.3-31.el5.centos.4.x86_64
> > > error: unpacking of archive failed on file /etc/httpd: cpio: lsetfilecon
> > >   Updating       : pam                                                                                                                 
> > > 8/64
> > > Error unpacking rpm package pam-0.99.6.2-6.el5_4.1.x86_64
> > > error: unpacking of archive failed on file /etc/pam.d: cpio: lsetfilecon
> > >   Updating       : pango                                                                                                               
> > > 9/64
> > > Error unpacking rpm package pango-1.14.9-8.el5.centos.x86_64
> > > error: unpacking of archive failed on file /etc/pango: cpio: lsetfilecon
> > >   Updating       : gnutls                                                                                                             
> > > 10/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > > error: %post(gnutls-1.4.1-3.el5_4.8.x86_64) scriptlet failed, exit status 
> > > 1
> > >   Updating       : libpurple                                                                                                          
> > > 11/64
> > > Error unpacking rpm package libpurple-2.6.6-2.el5_4.x86_64
> > > error: unpacking of archive failed on file /etc/purple: cpio: lsetfilecon
> > >   Installing     : kernel-xen                                                                                                         
> > > 12/64
> > > Error unpacking rpm package 
> > > kernel-xen-2.6.18-164.15.1.el5.centos.plus.x86_64
> > > error: unpacking of archive failed on file 
> > > /boot/.vmlinuz-2.6.18-164.15.1.el5.centos.plusxen.hmac;4bb08e02: cpio: 
> > > open
> > >   Installing     : kernel                                                                                                             
> > > 13/64
> > > Error unpacking rpm package kernel-2.6.18-164.15.1.el5.centos.plus.x86_64
> > > error: unpacking of archive failed on file 
> > > /boot/.vmlinuz-2.6.18-164.15.1.el5.centos.plus.hmac;4bb08e02: cpio: open
> > >   Updating       : cyrus-sasl                                                                                                         
> > > 14/64
> > > Error unpacking rpm package cyrus-sasl-2.1.22-5.el5_4.3.x86_64
> > > error: unpacking of archive failed on file 
> > > /etc/rc.d/init.d/saslauthd;4bb08e02: cpio: open
> > >   Updating       : mod_ssl                                                                                                            
> > > 15/64
> > > Error unpacking rpm package 1:mod_ssl-2.2.3-31.el5.centos.4.x86_64
> > > error: unpacking of archive failed on file 
> > > /etc/httpd/conf.d/ssl.conf;4bb08e02: cpio: open
> > >   Updating       : cpio                                                                                                               
> > > 16/64
> > > Error unpacking rpm package cpio-2.6-23.el5_4.1.x86_64
> > > error: unpacking of archive failed on file /bin/cpio;4bb08e02: cpio: open
> > >   Updating       : kmod-kvm                                                                                                           
> > > 17/64
> > > Error unpacking rpm package kmod-kvm-83-105.el5_4.28.x86_64
> > > error: unpacking of archive failed on file 
> > > /lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm: cpio: lsetfilecon
> > >   Updating       : kvm                                                                                                                
> > > 18/64
> > > Error unpacking rpm package kvm-83-105.el5_4.28.x86_64
> > > error: unpacking of archive failed on file 
> > > /etc/sysconfig/modules/kvm.modules;4bb08e02: cpio: open
> > >   Updating       : httpd-manual                                                                                                       
> > > 19/64
> > > Error unpacking rpm package httpd-manual-2.2.3-31.el5.centos.4.x86_64
> > > error: unpacking of archive failed on file 
> > > /etc/httpd/conf.d/manual.conf;4bb08e02: cpio: open
> > >   Updating       : cyrus-sasl-lib                                                                                                     
> > > 20/64
> > > Error unpacking rpm package cyrus-sasl-lib-2.1.22-5.el5_4.3.i386
> > > error: unpacking of archive failed on file /etc/sasl2: cpio: lsetfilecon
> > >   Updating       : nspr                                                                                                               
> > > 21/64
> > > error: %post(nspr-4.8.4-1.el5_4.i386) scriptlet failed, exit status 1
> > >   Updating       : nss                                                                                                                
> > > 22/64
> > > Error unpacking rpm package nss-3.12.6-1.el5.centos.i386
> > > error: unpacking of archive failed on file /etc/pki/nssdb: cpio: 
> > > lsetfilecon
> > >   Updating       : libpurple                                                                                                          
> > > 23/64
> > > Error unpacking rpm package libpurple-2.6.6-2.el5_4.i386
> > > error: unpacking of archive failed on file /etc/purple: cpio: lsetfilecon
> > >   Updating       : pam                                                                                                                
> > > 24/64
> > > Error unpacking rpm package pam-0.99.6.2-6.el5_4.1.i386
> > > error: unpacking of archive failed on file /etc/pam.d: cpio: lsetfilecon
> > >   Updating       : openssl                                                                                                            
> > > 25/64
> > > Error unpacking rpm package openssl-0.9.8e-12.el5_4.6.i686
> > > error: unpacking of archive failed on file /etc/pki/CA: cpio: lsetfilecon
> > >   Updating       : cyrus-sasl                                                                                                         
> > > 26/64
> > > Error unpacking rpm package cyrus-sasl-2.1.22-5.el5_4.3.i386
> > > error: unpacking of archive failed on file 
> > > /etc/rc.d/init.d/saslauthd;4bb08e02: cpio: open
> > >   Updating       : finch                                                                                                              
> > > 27/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > > error: %post(finch-2.6.6-2.el5_4.i386) scriptlet failed, exit status 1
> > >   Updating       : cyrus-sasl-plain                                                                                                   
> > > 28/64
> > >   Updating       : pango                                                                                                              
> > > 29/64
> > > Error unpacking rpm package pango-1.14.9-8.el5.centos.i386
> > > error: unpacking of archive failed on file /etc/pango: cpio: lsetfilecon
> > >   Updating       : gnutls                                                                                                             
> > > 30/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > > error: %post(gnutls-1.4.1-3.el5_4.8.i386) scriptlet failed, exit status 1
> > >   Updating       : nss-tools                                                                                                          
> > > 31/64
> > >   Updating       : thunderbird                                                                                                        
> > > 32/64
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.alias': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.ccwmap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.dep': Read-only file 
> > > system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.ieee1394map': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.inputmap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.isapnpmap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.ofmap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.pcimap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.seriomap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.symbols': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.usbmap': Read-only 
> > > file system
> > > rm: cannot remove `/boot/initrd-2.6.18-164.6.1.el5.centos.plus.img': 
> > > Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko': 
> > > Read-only file system
> > >   Cleanup        : kernel                                                                                                             
> > > 33/64
> > >   Cleanup        : httpd-manual                                                                                                       
> > > 34/64
> > >   Cleanup        : nspr                                                                                                               
> > > 35/64
> > >   Cleanup        : openssl                                                                                                            
> > > 36/64
> > > error: %postun(nspr-4.7.6-1.el5_4.i386) scriptlet failed, exit status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : gnutls                                                                                                             
> > > 37/64
> > > error: %postun(openssl-0.9.8e-12.el5_4.1.i686) scriptlet failed, exit 
> > > status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : pango                                                                                                              
> > > 38/64
> > > error: %postun(gnutls-1.4.1-3.el5_3.5.x86_64) scriptlet failed, exit 
> > > status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.alias': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.ccwmap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.dep': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.ieee1394map': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.inputmap': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.isapnpmap': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.ofmap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.pcimap': Read-only 
> > > file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.seriomap': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.symbols': 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.usbmap': Read-only 
> > > file system
> > > rm: cannot remove `/boot/initrd-2.6.18-164.6.1.el5.centos.plusxen.img': 
> > > Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > rm: cannot remove directory 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plusxen/weak-updates': Read-only 
> > > file system
> > >   Cleanup        : kernel-xen                                                                                                         
> > > 39/64
> > > error: %postun(pango-1.14.9-6.el5.centos.x86_64) scriptlet failed, exit 
> > > status 1
> > >   Cleanup        : cyrus-sasl-lib                                                                                                     
> > > 40/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : mod_ssl                                                                                                            
> > > 41/64
> > > error: %postun(cyrus-sasl-lib-2.1.22-5.el5.i386) scriptlet failed, exit 
> > > status 1
> > >   Cleanup        : nss-tools                                                                                                          
> > > 42/64
> > >   Cleanup        : libpurple                                                                                                          
> > > 43/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : cyrus-sasl                                                                                                         
> > > 44/64
> > > error: %postun(libpurple-2.6.6-1.el5.i386) scriptlet failed, exit status 1
> > >   Cleanup        : libpurple                                                                                                          
> > > 45/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : nss                                                                                                                
> > > 46/64
> > > error: %postun(libpurple-2.6.6-1.el5.x86_64) scriptlet failed, exit status 
> > > 1
> > >   Cleanup        : finch                                                                                                              
> > > 47/64
> > > error: %postun(nss-3.12.3.99.3-1.el5.centos.2.x86_64) scriptlet failed, 
> > > exit status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : cyrus-sasl                                                                                                         
> > > 48/64
> > > error: %postun(finch-2.6.6-1.el5.i386) scriptlet failed, exit status 1
> > >   Cleanup        : cyrus-sasl-plain                                                                                                   
> > > 49/64
> > >   Cleanup        : cyrus-sasl-plain                                                                                                   
> > > 50/64
> > >   Cleanup        : nss                                                                                                                
> > > 51/64
> > >   Cleanup        : pam                                                                                                                
> > > 52/64
> > > error: %postun(nss-3.12.3.99.3-1.el5.centos.2.i386) scriptlet failed, exit 
> > > status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : pam                                                                                                                
> > > 53/64
> > > error: %postun(pam-0.99.6.2-6.el5.x86_64) scriptlet failed, exit status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : openssl                                                                                                            
> > > 54/64
> > > error: %postun(pam-0.99.6.2-6.el5.i386) scriptlet failed, exit status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : cyrus-sasl-lib                                                                                                     
> > > 55/64
> > > error: %postun(openssl-0.9.8e-12.el5_4.1.x86_64) scriptlet failed, exit 
> > > status 1
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : nspr                                                                                                               
> > > 56/64
> > > error: %postun(cyrus-sasl-lib-2.1.22-5.el5.x86_64) scriptlet failed, exit 
> > > status 1
> > >   Cleanup        : kvm                                                                                                                
> > > 57/64
> > > error: %postun(nspr-4.7.6-1.el5_4.x86_64) scriptlet failed, exit status 1
> > >   Cleanup        : httpd                                                                                                              
> > > 58/64
> > >   Cleanup        : pango                                                                                                              
> > > 59/64
> > > /sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: 
> > > Read-only file system
> > >   Cleanup        : cpio                                                                                                               
> > > 60/64
> > > error: %postun(pango-1.14.9-6.el5.centos.i386) scriptlet failed, exit 
> > > status 1
> > >   Cleanup        : thunderbird                                                                                                        
> > > 61/64
> > >   Cleanup        : kmod-kvm                                                                                                           
> > > 62/64
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-amd.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/ksm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-intel.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.11.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-amd.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/ksm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-intel.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.10.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-amd.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/ksm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-intel.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.9.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-amd.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-amd.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/ksm.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/ksm.ko': File exists
> > > rmdir: /lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > rm: cannot remove 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko': 
> > > Read-only file system
> > > ln: creating symbolic link 
> > > `/lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm/kvm-intel.ko' 
> > > to `/lib/modules/2.6.18-164.11.1.el5/extra/kmod-kvm/kvm-intel.ko': File 
> > > exists
> > > rmdir: /lib/modules/2.6.18-164.6.1.el5.centos.plus/weak-updates/kmod-kvm: 
> > > Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.10.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.10.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/kvm.ko: No such 
> > > file or directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/kvm-amd.ko: No such 
> > > file or directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/ksm.ko: No such 
> > > file or directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/kvm-intel.ko: No 
> > > such file or directory
> > > FATAL: Could not open /lib/modules/2.6.18-164.11.1.el5/modules.dep.temp 
> > > for writing: Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.11.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.11.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > FATAL: Could not open /lib/modules/2.6.18-164.11.1.el5xen/modules.dep.temp 
> > > for writing: Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.9.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.9.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.10.1.el5.centos.plus.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.10.1.el5.centos.plus.tmp.gz: No such file or 
> > > directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.10.1.el5.centos.plus.img' to 
> > > `/boot/initrd-2.6.18-164.10.1.el5.centos.plus.img.dup_orig': Read-only 
> > > file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.10.1.el5.centos.plus.tmp': No 
> > > such file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.10.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.10.1.el5.centos.plusxen.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.10.1.el5.centos.plusxen.tmp.gz: No such file 
> > > or directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.10.1.el5.centos.plusxen.img' to 
> > > `/boot/initrd-2.6.18-164.10.1.el5.centos.plusxen.img.dup_orig': Read-only 
> > > file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.10.1.el5.centos.plusxen.tmp': No 
> > > such file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.10.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: /boot/initrd-2.6.18-164.11.1.el5.tmp: Read-only 
> > > file system
> > > zcat: /boot/initrd-2.6.18-164.11.1.el5.tmp.gz: No such file or directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.11.1.el5.img' to 
> > > `/boot/initrd-2.6.18-164.11.1.el5.img.dup_orig': Read-only file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.11.1.el5.tmp': No such file or 
> > > directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/kvm.ko: No such 
> > > file or directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/kvm-amd.ko: No such 
> > > file or directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/ksm.ko: No such 
> > > file or directory
> > > WARNING: Can't read module 
> > > /lib/modules/2.6.18-164.11.1.el5/weak-updates/kmod-kvm/kvm-intel.ko: No 
> > > such file or directory
> > > FATAL: Could not open /lib/modules/2.6.18-164.11.1.el5/modules.dep.temp 
> > > for writing: Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.11.1.el5.centos.plus.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.11.1.el5.centos.plus.tmp.gz: No such file or 
> > > directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.11.1.el5.centos.plus.img' to 
> > > `/boot/initrd-2.6.18-164.11.1.el5.centos.plus.img.dup_orig': Read-only 
> > > file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.11.1.el5.centos.plus.tmp': No 
> > > such file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.11.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.11.1.el5.centos.plusxen.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.11.1.el5.centos.plusxen.tmp.gz: No such file 
> > > or directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.11.1.el5.centos.plusxen.img' to 
> > > `/boot/initrd-2.6.18-164.11.1.el5.centos.plusxen.img.dup_orig': Read-only 
> > > file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.11.1.el5.centos.plusxen.tmp': No 
> > > such file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.11.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: /boot/initrd-2.6.18-164.11.1.el5xen.tmp: 
> > > Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.11.1.el5xen.tmp.gz: No such file or 
> > > directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.11.1.el5xen.img' to 
> > > `/boot/initrd-2.6.18-164.11.1.el5xen.img.dup_orig': Read-only file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.11.1.el5xen.tmp': No such file or 
> > > directory
> > > FATAL: Could not open /lib/modules/2.6.18-164.11.1.el5xen/modules.dep.temp 
> > > for writing: Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.6.1.el5.centos.plus.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.6.1.el5.centos.plus.tmp.gz: No such file or 
> > > directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.6.1.el5.centos.plus.img' to 
> > > `/boot/initrd-2.6.18-164.6.1.el5.centos.plus.img.dup_orig': Read-only file 
> > > system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.6.1.el5.centos.plus.tmp': No such 
> > > file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.6.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.6.1.el5.centos.plusxen.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.6.1.el5.centos.plusxen.tmp.gz: No such file 
> > > or directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.6.1.el5.centos.plusxen.img' to 
> > > `/boot/initrd-2.6.18-164.6.1.el5.centos.plusxen.img.dup_orig': Read-only 
> > > file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.6.1.el5.centos.plusxen.tmp': No 
> > > such file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.6.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.9.1.el5.centos.plus.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.9.1.el5.centos.plus.tmp.gz: No such file or 
> > > directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.9.1.el5.centos.plus.img' to 
> > > `/boot/initrd-2.6.18-164.9.1.el5.centos.plus.img.dup_orig': Read-only file 
> > > system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.9.1.el5.centos.plus.tmp': No such 
> > > file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.9.1.el5.centos.plus/modules.dep.temp for writing: 
> > > Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > > /sbin/mkinitrd: line 1902: 
> > > /boot/initrd-2.6.18-164.9.1.el5.centos.plusxen.tmp: Read-only file system
> > > zcat: /boot/initrd-2.6.18-164.9.1.el5.centos.plusxen.tmp.gz: No such file 
> > > or directory
> > > mv: cannot move `/boot/initrd-2.6.18-164.9.1.el5.centos.plusxen.img' to 
> > > `/boot/initrd-2.6.18-164.9.1.el5.centos.plusxen.img.dup_orig': Read-only 
> > > file system
> > > mv: cannot stat `/boot/initrd-2.6.18-164.9.1.el5.centos.plusxen.tmp': No 
> > > such file or directory
> > > FATAL: Could not open 
> > > /lib/modules/2.6.18-164.9.1.el5.centos.plusxen/modules.dep.temp for 
> > > writing: Read-only file system
> > > grubby: error creating /boot/grub/grub.conf-: Read-only file system
> > >   Cleanup        : cyrus-sasl-md5                                                                                                     
> > > 63/64
> > > 
> > > Removed:
> > >   kernel.x86_64 0:2.6.18-164.6.1.el5.centos.plus                     
> > > kernel-xen.x86_64 0:2.6.18-164.6.1.el5.centos.plus
> > > 
> > > Updated:
> > >   cyrus-sasl-md5.x86_64 0:2.1.22-5.el5_4.3       cyrus-sasl-plain.i386 
> > > 0:2.1.22-5.el5_4.3     cyrus-sasl-plain.x86_64 0:2.1.22-5.el5_4.3
> > >   finch.i386 0:2.6.6-2.el5_4                     gnutls.i386 
> > > 0:1.4.1-3.el5_4.8                gnutls.x86_64 0:1.4.1-3.el5_4.8
> > >   nspr.i386 0:4.8.4-1.el5_4                      nspr.x86_64 
> > > 0:4.8.4-1.el5_4                  nss-tools.x86_64 0:3.12.6-1.el5.centos
> > >   thunderbird.x86_64 0:2.0.0.24-2.el5.centos
> > > 
> > > Failed:
> > >   cpio.x86_64 0:2.6-23.el5_4.1                                           
> > > cyrus-sasl.i386 0:2.1.22-5.el5_4.3
> > >   cyrus-sasl.x86_64 0:2.1.22-5.el5_4.3                                   
> > > cyrus-sasl-lib.i386 0:2.1.22-5.el5_4.3
> > >   cyrus-sasl-lib.x86_64 0:2.1.22-5.el5_4.3                               
> > > httpd.x86_64 0:2.2.3-31.el5.centos.4
> > >   httpd-manual.x86_64 0:2.2.3-31.el5.centos.4                            
> > > kernel.x86_64 0:2.6.18-164.15.1.el5.centos.plus
> > >   kernel-xen.x86_64 0:2.6.18-164.15.1.el5.centos.plus                    
> > > kmod-kvm.x86_64 0:83-105.el5_4.28
> > >   kvm.x86_64 0:83-105.el5_4.28                                           
> > > libpurple.i386 0:2.6.6-2.el5_4
> > >   libpurple.x86_64 0:2.6.6-2.el5_4                                       
> > > mod_ssl.x86_64 1:2.2.3-31.el5.centos.4
> > >   nss.i386 0:3.12.6-1.el5.centos                                         
> > > nss.x86_64 0:3.12.6-1.el5.centos
> > >   openssl.i686 0:0.9.8e-12.el5_4.6                                       
> > > openssl.x86_64 0:0.9.8e-12.el5_4.6
> > >   pam.i386 0:0.99.6.2-6.el5_4.1                                          
> > > pam.x86_64 0:0.99.6.2-6.el5_4.1
> > >   pango.i386 0:1.14.9-8.el5.centos                                       
> > > pango.x86_64 0:1.14.9-8.el5.centos
> > > 
> > > Complete!
> > > 
> > > 
> > > _______________________________________________
> > > https://lists.linux.sk/mailman/listinfo/linux
> > > Meta FAQ: http://www.sklug.sk/lists/linux/metafaq.html
> > 
> > 
> 




Další informace o konferenci linux