[linux] Ako mountnut sietovy disk zapojeny cez router?

[Stefan Huska]

dakujem vsetkym za rady.

hmm, k tomu ftp-like rozhraniu som sa dopracoval cez:

$ smbclient //WL500G.PREMIUM2/part0
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.2]
smb: \> ls
  .                                   D        0  Sun Jun 15 13:48:52 2008
  ..                                  D        0  Thu Jan  1 01:00:13 1970
  share                               D        0  Sun Jun 15 13:52:30 2008
  .etc                               DH        0  Sun Jun 15 13:48:53 2008
[a tak dalej]



ale


$ smbmount //WL500G.PREMIUM2/part0 /home/kelso/test
mount error: could not find target server. TCP name
WL500G.PREMIUM2/part0 not found
No ip address specified and hostname not found






inak tu je vypis (taky isty je aj pri //192.168.1.1):

$ smbclient -L //WL500G.PREMIUM2
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.2]

	Sharename       Type      Comment
	---------       ----      -------
	part0           Disk      part0
	IPC$            IPC       IPC Service (WL500g.Premium version 2)
	ADMIN$          IPC       IPC Service (WL500g.Premium version 2)
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.2]

	Server               Comment
	---------            -------
	KELSO-D927CC4DE
	WL500G.PREMIUM2      WL500g.Premium version 2

	Workgroup            Master
	---------            -------
	WORKGROUP            WL500G.PREMIUM2




Takze do ftp-like prostredia sa mi da dostat, ale mount uz nejde.




2008/6/14 Milan Plzik <emempi na gmail.com>:
> On So, 2008-06-14 at 12:49 +0200, Stefan Huska wrote:
>> Ahojte,
>>
>> moj router Asus WL-500g v2 ma okrem ineho aj usb pripojku v ktorom mam
>> pichnuty externy disk. Mozem k nemu tak pristupovat ako z desktopu,
>> tak aj z notebooku.
>
>  Toto zariadenie (akurat v1) mam aj ja, celkom pekny kusok:) Bohuzial
> na nom nemam originalny firmware, takze neviem uplne presne poradit.
>
>>
>> Avsak viem sa k nemu dostat jedine cez miesta v sieti (samba?) alebo
>> cez ftp (ftp://192.168.1.1). Co je sice fajn, ale da sa nejako ten
>> disk fixne mountnut?
>
>  Jednou z moznosti je pouzit fuse, ktore tusim vie mountovat (okrem
> vela inych veci) aj ftp, osobne som ale neskusal.
>
>>
>> Googlil som a nasiel som riesenie toho typu, ze do /etc/fstab pripisem
>> riadok v zmysle:
>> //server/disk1 /mnt/disk1 smbfs username=xxx,password=xxx 0 0
>>
>> alebo
>>
>> smbmount //server/disk1 /mnt/disk1
>>
>>
>>
>> ale neviem co ma byt to "//server", tak som skusil adresu routra:
>>
>> smbmount //192.168.1.1/share ~/test
>>
>>
>> a dostal som sa zial len k tomuto:
>>
>> kelso na neuron:~$ smbmount //192.168.1.1/share ~/test
>> Password:
>> retrying with upper case share name
>> mount error 6 = No such device or address
>> Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
>>
>>
>> neviete prosim niekto poradit ako na to?
>>
>  Najskor by som sa skusil zistit meno sharu cez smbclienta
> (predchadajuci vystup vyzera, ze sa 'share' nieco nemusi pacit):
>
> smbclient -L //server
>
>  to by malo vypisat, ako presne sa vola. Potom cez
>
> smbclient //server/mojshare
>
>  by si sa mal vediet dostat ku ftp-like rozhraniu na prenos suborov,
> malo by vediet fungovat 'ls' a nejake dalsie veci. Ak ano v takomto
> pripade by malo fungovat aj smbmount //server/mojshare /mountpoint, ak
> nefunguje, pozrel by som sa (po neuspesnom pokuse) do dmesg, mozno tam
> bude nejaka uzitocna informacia.
>
>  Hadam som aspon trosku pomohol.
>
>        Milan
>
> _______________________________________________
> https://lists.linux.sk/mailman/listinfo/linux
> Meta FAQ: http://www.sklug.sk/lists/linux/metafaq.html
>



-- 
Stefan Huska
http://www.frk.sk